Advertisement
2007.07.24_Food processor manual.qxp
The control knob has three settings: 'Off', continuous
'On' or intermittent 'Pulse'.
•
'Off': the processor is 'off' when the control knob is
in the vertical position
•
Continuous 'On': rotate the knob clockwise to
the ' I ' symbol'. It will remain on until manually
turned back to the 'Off' position
•
Intermittent 'Pulse': uses short pulses for more
control while processing. Rotate the knob
anti-clockwise to 'Pulse'. When released it will
automatically return to the 'Off' position. Allow a
couple of seconds for the ingredients to drop before
pulsing again.
The processor features an overheat cut-out that cuts
the power if it becomes too hot for any reason. If this
occurs turn the control knob to the off position and
unplug the power cord. Once it cools down, the safety
cut-out will automatically reset itself within 1 hour and
the power will be restored.
25/07/2007
09:12
ASSEMBLING AND USING YOUR PROCESSOR
Page 20
CONTROLS
'OFF'
'ON'
'PULSE'
20
Advertisement
