Table of Contents
Summary of Contents for Axema AX-Power Plus
- Page 1 Kit for expansion of AX-Power 4 Plus with additional 4 PoE+ ports, up to a max- imum of 12 ports. Axema Access Control AB | Box 90215 | 120 23 Stockholm, Sweden | +46 (0)8-722 34 40 | info@axema.se | www.axema.se...
- Page 2 Security This instruction must be read in its entirety by all operating personnel. In case of doubt about the unit's structure, function, components or safety, Axema must be con- tacted. Only a qualified electrician may install and maintain this unit. Only insulated tools should be used when working with the unit.
- Page 3 The AX-Power Switch Kit is mounted in a free compartment Installation of Switch Kit AX-Power Plus The AX-Power 4 Plus can be expanded with one or two Switch Kit AX-Power Plus to eight and twelve PoE ports, respectively. 1. Disconnect the 230 VAC supply to the unit 2.
- Page 4 switch, to the existing socket's link socket (9 in the connections section). 6. Activate the 230 VAC supply to the unit. Approximate battery times A door environment with a reading terminal with an inactive electric lock normally corresponds to a load of less than 6W.
Need help?
Do you have a question about the AX-Power Plus and is the answer not in the manual?
Questions and answers