Subscribe to Our Youtube Channel
Related Manuals for Petsafe ZND-1200
Summary of Contents for Petsafe ZND-1200
- Page 1 ZND-1200 Product Manual pawz away ® indoor pet barrier PLEASE READ THIS ENTIRE PRODUCT MANUAL BEFORE BEGINNING.
- Page 2 If you have any questions, please don’t hesitate to contact us. Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia PTY Ltd. and any other affiliate or brand of Radio Systems Corporation may be referred to collectively as “We”...
- Page 3 • You may need to trim the hair in the area of the Contact Points. Never shave the dog’s neck; this may lead to a rash or infection. petsafe.com...
-
Page 4: Table Of Contents
• To prevent an unintended correction, do not perform set up procedures while the Receiver Collar is on your pet. • If you are using a collar and leash for training, be sure the extra collar does not put pressure on the Contact Points of the Receiver Collar. •... -
Page 5: Components
(3 AA Batteries not included) (2) 3-V Lithium Batteries for Receiver Collar (4) Barrier Transmitter Grip Pads Test Light Tool Other Items You May Need • Drill and mounting hardware • Non-metallic collar and leash • Scissors • Lighter petsafe.com... -
Page 6: How The System Works
The correction continues until your pet leaves the Barrier Area. If your pet doesn’t leave, the collar will continue to correct at the maximum level after 3 seconds until the 15 second time-out. The PetSafe Pawz Away Indoor Pet Barrier has been proven safe, comfortable, ®... -
Page 7: Operating Guide
Barrier Transmitter in any mode other than A. Please see the Additional Features section of this operating and training guide (beginning on page 11) for instructions on how to utilize mode A and B. petsafe.com... -
Page 8: Test The Barrier Area
5. Hold the Receiver Collar with the Contact Points facing up. Place the Test Light Tool on the Contact Points so that the wire in the Test Light Tool touches the Contact Points (3A). The PetSafe logo on the Receiver Collar ®... -
Page 9: Fit The Receiver Collar On Your Pet
1. Using the edge of the Test Light Tool, turn the battery door to the OFF (O) position. 2. Start with your pet standing comfortably (4A). 3. Place the Receiver collar on your pet so that the PetSafe logo is ®... -
Page 10: To Re-Thread The Collar
4. Adjust the tightness of the Receiver Collar to fit your pet’s neck. Check the tightness of the Receiver Collar by inserting one finger between the end of a Contact Point and your pet’s neck. The fit should be snug but not constricting (4B). -
Page 11: Receiver Collar Batteries
For multiple pet households, additional PetSafe Pawz Away Receiver Collars can be ® ® purchased to work with one or more PetSafe Pawz Away Indoor Barrier Transmitters. ® ® You can set up an unlimited number of Barrier Transmitters in your home and an unlimited number of Receiver Collars can be used with one or more Barrier Transmitters. - Page 12 When the Barrier Transmitter and Receiver Collar are set to mode A, the Barrier Transmitter denies access to pets wearing a Receiver Collar programmed to mode A. Receiver Collars set to mode B will not pick up the signal from a Barrier Transmitter set to mode A. Barrier Transmitter When the Barrier Transmitter and Receiver Collar are...
-
Page 13: Programming The Mode Settings
5. Once the Receiver Collar has been programmed, press the UP (+) arrow button to turn the Barrier Transmitter ON. Check to make sure the black bar(s) appear on the LCD screen indicating the mode you have selected (5B) and reset the Barrier Transmitter to the desired range. Mode A Mode B Mode AB petsafe.com... -
Page 14: Training Guide
Training Guide The PetSafe Pawz Away Indoor Pet Barrier operates on the principle of positive and negative ® ® reinforcement. Your pet will learn to avoid the Barrier Areas you have set after receiving a Progressive Static Correction (negative reinforcement) and your pet will learn that he is more comfortable when he avoids the Barrier Areas (positive reinforcement). -
Page 15: Accessories
Accessories To purchase additional accessories for your PetSafe Pawz Away Indoor Pet Barrier, ® ® contact the Customer Care Center or visit our website to locate a retailer near you. Troubleshooting Barrier Transmitter does not • Check segment indicator on Barrier Transmitter. -
Page 16: Terms Of Use And Limitation Of Liability
Terms of Use and Limitation of Liability 1. Terms of Use The use of this product is subject to your acceptance without modification of the terms, conditions and notices contained with this product. Use of this product implies acceptance of all such terms, conditions, and notices. If you do not wish to accept these terms, conditions, and notices, please return the product, unused, in its original packaging and at your own cost and risk to the relevant Customer Care location together with proof of purchase for a full refund. -
Page 17: Compliance
Monday - Friday 10:30 AM - 7 PM This product has the benefit of a limited manufacturer’s warranty. Details of the warranty applicable to this product and its terms can be found at www.petsafe.net and/or are available by sending a stamped addressed envelope to Radio Systems PetSafe Europe Ltd. -
Page 18: Warranty
One Year Non-Transferable Limited Warranty This Product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this Product and its terms can be found at petsafe.com and/or are available by contacting your local Customer Care Center. - Page 19 Should you have any queries or require any further information, please contact our Customer Care Centre on 1800 786 608 (Australia) or 0800 543 054 (New Zealand). petsafe.com...
- Page 20 Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 +1 (800) 732-2677 petsafe.com J400-1425/3 ©2020 Radio Systems Corporation...
Need help?
Do you have a question about the ZND-1200 and is the answer not in the manual?
Questions and answers