Do you have a question about the RV-007 and is the answer not in the manual?
Questions and answers
Summary of Contents for TX RV-007
Page 1
SET TOP BOX RV-007 Operation Manual HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Page 3
1. Important Safety Precautions ......................23 2. What’s in the box? .......................... 23 3. Overview ............................24 4. Remote Control..........................25 5. Connecting Up ..........................26 6. Getting Started ..........................27 Start using the remote control ....................... 27 Switching on your set top box ....................... 27 First Time Set Up ...........................
This prevents overheating of your product. 2. What’s in the box? Please check for the supplied contents as shown below. ‹‹ Remote Control Unit ‹‹ DVB-T2 Receiver TX RV-009 ALPHA HDMI Cable ›› AAA Batteries for remote control unit ›› ‹‹ A/V Cable ‹‹...
4. Remote Control Stand-by button ① Mute or restore audio output ② ① ② EPG: Call up the Electronic Program Guide INFO: Show information of the current program TTX: Teletext AUDIO: Select audio streaming source PVR: Record TV program SUB: Turn on/off subtitles MENU: Go to main menu EXIT: Exit / close current Menu or return to previous menu ▲...
5. Connecting Up To complete the connections between antenna, the set top box , and TV, please follow the below instructions: Step 1 Connect the cable that comes from antenna cable to the RF IN socket on the back of your set top box Step 2 Connect the set top box to your TV using one of the followings connectors: ...
6. Getting Started Start using the remote control Step 1 Open the battery cover of the remote control and put two AAA size batteries so that the ‘+’ and ‘-‘ marks on the batteries match the ‘+’ and ‘-‘ marks inside the remote control. Replace the battery cover. Step 2 To use the remote control, point it towards the front of the set top box.
Select [OSD Language] and press ◄ / ► to select English Select [Country Setting] and press ◄ / ► to select Thailand Select [Tuner System] and press ◄ / ► to select T2 Select [Antenna Setting] and press ◄ / ► to turn ON/OFF the antenna power supply (Please check the compatibility of your antenna) Select [Auto Scan] and press OK to start scanning for channels 7.
8. Main Menu Press MENU to enter Main Menu and press ◄ / ► to select sub menus which consist of: Installation Select [Antenna Setting] and press ◄ / ► to turn ON/OFF the antenna power supply (Please check the compatibility of your antenna) Select [Country Setting] and press ◄...
Channel Select [TV Channel Editor] and press OK to edit channel numbers and favorite group of channels Select [Radio Channel Editor] and press OK to edit radio channels Select [EPG] and press OK to call up EPG screen (You can also access EPG by pressing EPG button on the remote control) Select [LCN] and press ◄...
Time Select [GMT Usage] and press ◄ / ► to turn On/Off GMT (Greenwich Mean Time). Normally the set top box will adjust the time according to time information transmitted with the TV signal. Select [Time Zone] and press ◄ / ► to change time zone Select [Sleep Time] and press ◄...
TV Setup Select [TV Format] and press ◄ / ► to adjust the aspect ratio (16:9 LB / 16:9 FIT / 4:3 LB / 4:3 PS) Select [TV Mode] and press ◄ / ► to change the output mode (Auto / PAL / NTSC) to your TV. Incorrect setting may lead to distortion and malfunction of your TV screen.
Language Select [OSD Language] and press ◄ / ► to select the language for OSD Select [Audio Language] and press ◄ / ► to select the audio language (Availability depends on programme) Select [Subtitle Language] and press ◄ / ► to select the subtitle language (Availability depends on programme) Select [Digital Audio Output] and press ◄...
Select [Update & Backup] and press OK to enter Update and Backup menu Select [Factory Setting] and press OK twice to return the box to default factory setting (Warning: this will result deletion of all data in the box) Select [Calendar] and press OK to enter Calendar screen Select [Calculator] and press OK to use Calculator Select [Games] and press OK to play games Select [Multimedia] and press OK to enter Multimedia mode...
9. Other Highlights and Functions Assigning and Using Favorite Channels Assigning favorite channels can be done according to the following instructions Enter Main Menu Channel > [TV Channel Editor] to enter TV Channel Editor screen Press ▲ CH+/ ▼ CH- to select the channel that you want to assign as Favorite Channel Press FAV button to bring up Favorite Channel icons Press ◄...
To use Favorite Channels, press FAV to select Favorite group of channels, then press ▲ CH+/ ▼ CH- to select channels. If you want to turn off Favorite Channels, press FAV button until ‚FAV off‛ is shown on the top left of the TV screen. Programme Recording (PVR) To record programme by using USB device, you can do the followings: Check if the setting in Main Menu >...
PVR Schedule To record programmed by PVR scheduling, you can do the followings: Via Adv Timer in Time Menu Enter the Main Menu Time > [Adv Timer] to display the Adv Timer screen Press OK to select timing slot (Total of 9 recording events can be set by users) Edit Channel No., Start Date, Start Time, End Time, and Mode (Once, Weekly, Weekend, Weekday, Daily) Make sure that the Timer Mode is set to Recorder (If the Timer Mode is left in Schedule, the...
Page 41
Press OK to confirm recording settings. Via Electronic Program Guide (EPG) Call up Electronic Program Guide by pressing EPG button on the remote control Press ▲ CH+/ ▼ CH- to select the channel that you would like to record Press ►...
Page 42
Make sure that the Timer Mode is set to Recorder (If the Timer Mode is left in Schedule, the set top box will only turn on without recording the programme) Press OK to confirm recording settings. After recording timer has been set, you can put the box in stand-by mode. The set top box will automatically turn on to record the programme according to the schedule and will go back to stand-by mode again after recording ends.
Timeshift You can use Timeshift button on the remote control to pause the current programme that you are watching, and then resume the programme later when you are ready. Check if the setting in Main Menu > USB > [Recorder Setting] > [Timeshift] is in Auto mode When you would like to pause the program, press PAUSE button on the remote control to start Timeshift and pause the programme Press PLAY to continue watching the programme...
Audio MP3, WMA Image JPEG, BMP, PNG, GIF, TIF Video MKV, AVI, DIVX, XVID, MOV, VOB, FLV, DAT, MPEG, MPG, MP4, TS Movie Playback You can use Multimedia control buttons to control movie playback (Please see Page 4) Audio streaming can be chosen by pressing AUDIO button on the remote control and press ▲...
10. Troubleshooting Problems What you can do No picture Check if the box is properly connected to the main power supply Refer to the TV user manual for how to select the correct video input channel. If you are connecting the box to TV using HDMI cable, check if your TV has a valid HDCP key.
Need help?
Do you have a question about the RV-007 and is the answer not in the manual?
Questions and answers