Advertisement
Quick Links
Advertisement
Summary of Contents for Reef Factory Reef flare
- Page 1 Thank you for purchasing our device Reef flare (size S, M, L) Reef flare device manual 1/14...
- Page 2 Apart from the Reef flare device itself, the package contains the following elements: a power cord, a dedicated power supply unit, a magnet that can be used to reset the device and an abbreviated manual. In order to set up the device correctly, follow the steps below.
- Page 3 If you entered the address correctly and you see the following message, it means that a connection with the device couldn’t be established, and the connection with your home Internet network (wired or wireless) is still active. Try to reconnect to the device and repeat the steps described above. Reef flare device manual 3/14...
- Page 4 Set up your device in five simple steps. Step one - choose the language you want to use when operating the device. Reef flare device manual 4/14...
- Page 5 Step two - set up the lamp operation parameters, set the time and date, set the hour the lamp is switched on and off as well as the white light strength. Reef flare device manual 5/14...
- Page 6 The signal of your wireless network should be as strong as possible. Remember that in order to enable communication with the Smart Reef system, the network device which is connected to Reef flare needs to have Internet access. Reef flare device manual...
- Page 7 When the Reef flare device successfully connects to your Wi-Fi network, its IP number will appear in the upper left corner of the screen. The appearance of the IP number means that everything is alright. Reef flare device manual 7/14...
- Page 8 If you don’t need to manage your device remotely, you may ignore this step. However, by doing so you will miss out on several additional features, such as access to device updates. Reef flare device manual 8/14...
- Page 9 Step five - congratulations, you have successfully set up your Reef flare device. Reef flare device manual 9/14...
- Page 10 When the parameters are set, the lamp system informs about the current light strength and lamp operation temperature. After setting the lamp operation parameters remember to save them by adding Reef flare device manual 10/14...
- Page 11 The timer mode also allows you to save your presets, just like in the PROGRAMS mode. This mode may be also used to temporarily change the lamp operation settings, for instance to take photos. During the photo shoot, you Reef flare device manual 11/14...
- Page 12 Reef flare device manual 12/14...
- Page 13 (we recommend to do so once a month, no less frequently than once a quarter). This way, the lamp will give out heat more efficiently. Reef flare device manual 13/14...
- Page 14 14. Additional and up-to-date information about the device, its operation and setup can be found at our website www.reeffactory.com, in the relevant product tab. Reef flare device manual 14/14...
Need help?
Do you have a question about the Reef flare and is the answer not in the manual?
Questions and answers