FreeWave ZumEnge IOEX-4440 Quick Start Manual

Transmitter Transmitter
902 to 928 MHz
Frequency Range* Frequency Range* 902 to 928 MHz
Output Power* Output Power* 10 mW to 1 W: user selectable 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Range 97 km (60 miles) with clear line of sight
Channel Spacing Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
RF Data Rater
Quick Start Guide
user selectable user selectable
Receiver Receiver
IF Selectivity IF Selectivity > 40 dB > 40 dB
System Gain 135 dB 135 dB
System Gain
Sensitivity Sensitivity
RF Data Rates RF Data Rates
FreeWave ZumEdge Quick-Start
115.2 kbps 115.2 kbps
250 kbps 250 kbps
500 kbps 500 kbps
The ZumEdge is designed to quickly add I/O and application development capability to your Ethernet and serial
1 Mbps 1 Mbps
IIoT systems. This guide will get you started with configuring the ZumEdge and I/Os to your application, and
introduce you to the application development environment that comes standard on the ZumEdge. To get 1.5 Mbps (Beta) -90 dBm
1.5 Mbps (Beta) -90 dBm
started, please follow this guide for initial configuration of the device.
4 Mbps 4 Mbps
To follow along with your device, you will need at least a ZumEdge base module and a FreeWave IOEX device,
Data Transmission
Data Transmission
as well as a computer running Windows with a free Ethernet port that you can use to connect to the ZumEdge
Type Type Frequency Hopping Spread Spectrum Frequency Hopping Spread Spectrum
device. If no Ethernet port exists, a USB-to-Ethernet adapter will work in an identical way.
Modulation 2 level GFSK 2 level GFSK
Modulation
4- and 8-ary FSK
4- and 8-ary FSK
The example system used in this quick-start guide is a common tank level monitoring implementation.
Link Throughput Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression Up to 1.6 Mbps; 4 Mbps with Compression
We'll use the ZumEdge to configure an IO module to deliver power to, and receive analog input from, a
tank level sensor, with the assumption that the user will be communicating with the device through a REST ARQ and CRC, retransmit on error, FEC
Error Detection Error Detection ARQ and CRC, retransmit on error, FEC
API running on their control application. Once configured, the user will be able to read from, write to, and
400, 200, 100, 50, 25 ms
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Rates
fully reconfigure the ZumEdge and IO devices through REST API calls.
Hopping Channels* Hopping Channels* Up to 110; RF Data Rate Dependent
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Hopping Patterns Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Protocol Adaptive Spectrum Learning (ASL) Adaptive Spectrum Learning (ASL)
User Interface Rates User Interface Rates Ethernet Rate: 10/100 Mbps Ethernet Rate; 10/100 Mbps
Serial Rate: up to 250 kbps
Serial Rate; up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Advanced Features Packet Compression and Aggregation
Packet Compression and Aggregation
Computing Resources (OPTIONAL UPGRADE)** Computing Resources (OPTIONAL UPGRADE)**
CPU CPU ARM Cortex-A8 1 GHz ARM Cortex-A8 1 GHz
RAM RAM 1 GB
1 GB
Storage 1 GB
Storage 1 GB
OS
OS Debian-based Linux Debian-based Linux
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
TM
ZumEdge
| ZumLink™ 900 Series
TM
Without FEC Without FEC With FEC With FEC
-105 dBm -105 dBm -108 dBm -108 dBm
-102 dBm -102 dBm -105 dBm -105 dBm
-99 dBm -99 dBm -102 dBm -102 dBm
-95 dBm -95 dBm -98 dBm -98 dBm
-93 dBm
-93 dBm
-83 dBm -83 dBm -86 dBm -86 dBm
Example System Implementation
IOEX-4440;
Management Management
4422; 4404
Management Management
Networking Networking
VLAN VLAN
Serial
Serial
Traffic Filtering
Interfaces
Interfaces
Data Connectors Data Connectors
USB Connectors USB Connectors
RF Connector
RF Connector
Power Connectors Power Connectors
Power Requirements Power Requirements
Operating Voltage Operating Voltage
Current Consumption
Current Consumption
General Information
General Information
Operating Operating
Temperature Temperature
Humidity Humidity
Dimensions Dimensions
Weight
Reliability
Weight Safety
UL
Reliability
Safety
Information to Order
UL
Model Number
Z9-IO-PE-ZE
Information to Order
IOEX-4440; 4422;4404
Model Number
Z9-P2
Z9-PE2
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
5395 Pearl Parkway TF:
Boulder, CO 80301 Tel:
HTTP, SSH
HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Modbus
802.1Q 802.1Q
TCP server, Modbus/TCP, Modbus RTU,
TCP server, Modbus/TCP, Modbus RTU,
TCP client
TCP client
Netmask filter, ARP filter
Z9-IO-PE-ZE
Four RJ-45 (2 Ethernet, 2 Serial)
Four RJ-45 (2 Ethernet, 2 Serial)
Micro USB Micro USB
Type A (Future Expansion)
Type A (Future Expansion)
TNC TNC
Phoenix Contract (#1776692) Phoenix Contact (#1776692)
+6 to +30 VDC
+6 to +30 VDC
Voltage Voltage Transmit Transmit Receive Receive
12 VDC 377 mA 159 mA
12 VDC 377 mA 159 mA
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
+6 to +30 VDC
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
0 to 95% non-condensing
0 to 95% non-condensing
Z9-P2:
165.28 L x 76.89W x 27.55 (mm))
170.18 L x 86.6 W x 27.18 H (mm)
6.51 L x 3.03 W x 1.08 H (Inches)
6.70 L x 3.41 W x 1.07 H (in)
0.5lbs/250C
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in) MTBF 206,186
Class I, Division 2, Groups A-D
Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
MTBF 206,186
Class I, Division 2, Groups A-D
Z9-P2: Z9-PE2:
ZumEdge
IO Expansion
Board Level Unit, 902 to 928 MHz
Enclosed Unit, 902 to 928 MHz
1.866.923.6168 www.freewave.com
303.381.9200
Idle Idle
143 mA
143 mA
LDS0010AA