Adjusting The Equalizer - Sony STR-DE997 Operating Instructions Manual

x EFFECT XXX (Effect level)
Initial setting: STD
Lets you adjust the "presence" of the surround effect.
Resetting sound fields to the
initial settings
Use the buttons on the receiver for the operation.
1
Press ?/1 to turn off the power.
2
While holding down 2CH, press
?/1.
"S.F. INITIALIZE" appears in the display
and all sound fields are reset to the initial
setting.
US
38

Adjusting the equalizer

You can adjust the tonal quality (bass, treble
level) of the front speakers using the
EQUALIZER menu. These settings are applied
to all sound fields and can be reproduced
whenever you turn on the equalizer.
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
2
Press MAIN MENU repeatedly to select
" EQUALIZER
3
Turn MENU to select the parameter you
want to adjust.
For details, see "EQUALIZER menu
parameters" below.
4
While monitoring the sound, turn –/+ to
select the setting you want.
The setting is entered automatically.
5
Repeat steps 3 and 4 to adjust the other
items.
Note
You cannot adjust the equalizer when the receiver is
decoding signals with a sampling frequency of more
than 48 kHz, or when DTS 96/24, DTS-ES Matrix or
DTS Neo:6 decoding is applied.
EQUALIZER menu parameters
x BASS XXX.X dB
(Front speaker bass level)
x TREBLE XXX.X dB
(Front speaker treble level)
Initial setting: 0 dB
You can adjust from –10 dB to +10 dB in 0.5 dB steps.
x EQUALIZER XXX (Equalizer on/off)
Initial setting: OFF
Select "ON" to activate the equalizer.
".