Subscribe to Our Youtube Channel
Summary of Contents for D-NAIL 1.4
- Page 1 DIGITAL CONTROLLER INSTRUCTIONS R E A D B E F O R E U S E : IMPORTANT USER INFORMATION...
- Page 2 3 Plug ® heater into HEATER INPUT (A) D-NAIL Only D-NAIL® heaters should be used. Other heaters fit plug, but may not work. turns on heater. HEATER SWITCH (E) ENSURE HEATER COILS ARE IN A SAFE POSITION...
- Page 3 SET TEMPERATURE: MUST BE ADJUSTED BEFORE FIRST USE 1 Press button once to adjust temperature. ‘CLSE’ Screen will display Pressing SET twice will display ‘A 2 S E ’ which is the alarm set point and doesn’t need adjustment. Default value is 1112. CONTROL FACE B U T TO N S Pressing SET again will return to temperature.
- Page 4 ASSEMBLE HEATER & NAIL: DO NOT ASSEMBLE WHILE HEATER IS PLUGGED INTO CONTROLLER DO NOT OVER-TIGHTEN tighten by hand threaded parts until snug Nail styles, materials & heater size may vary from pictures. Visit D-Nail.com for examples of other assemblies.
- Page 5 KEEPING NAIL CLEAN: After every application clean unvaporized material with dry cotton swab. Unvaporized material builds up as black residue. WHEN COOL USE ISOPROPYL ALCOHOL TO CLEAN. CLEAN BUILD UP INSIDE DISH: 1 Heat dish to approximately 900OF for several minutes, until residue becomes ash.
- Page 6 2 YEAR WARRANTY ON ALL PARTS AGAINST FAILURE. Repair after two years or from accidental damage can be done at a fair price. Lifetime warranty option available on D-NAIL.COM Information from sticker on the bottom of controller is needed to claim warranty service. CONTACT@D-NAIL.COM OR FACEBOOK.COM/DNAIL710...
Need help?
Do you have a question about the 1.4 and is the answer not in the manual?
Questions and answers