Advertisement
Instruction manual test stand for an
analog Shore hardness tester
SAUTER TI
Version 2.0
03/2020
GB
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
PROFESSIONAL MEASURING
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
TI-BA-e-2020
Advertisement
Table of Contents
Summary of Contents for sauter TI
- Page 1 Sauter GmbH Ziegelei 1 Phone : +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 e-mail: info@kern-sohn.com Internet: www.sauter.eu Instruction manual test stand for an analog Shore hardness tester SAUTER TI Version 2.0 03/2020 PROFESSIONAL MEASURING TI-BA-e-2020...
- Page 2 Instruction manual test stand for an analog Shore hardness tester Congratulations on the purchase of the SAUTER TI test stand for our analogue Shore hardness testers. This table-top test stand is very robust and the device will last you many years if you operate and maintain it properly.
- Page 3 The test stand was developed especially for our Shore hardness testers. In combination with these, the measuring results are up to 25% more stable and more accurate. The TI-A0 is used for HB hardness testers Shore A and 0 and the TI-D for HB hardness tester Shore D.
- Page 4 2. the test bench should only be used in a vibration-free environment The maximum print speed during the test should be 3.2mm/s. 6 Maintenance To avoid rust, the test bench should be cleaned with a soft cloth after each use. Under no circumstances should aggressive cleaning agents be used. TI-BA-e-2020...
Need help?
Do you have a question about the TI and is the answer not in the manual?
Questions and answers