Enabling/Disabling The Digital Radio Clock; Setting The Digital Radio Clock; Adjusting The Time And Date - Buick 2011 Enclave Owner's Manual

Enabling/Disabling the Digital
Radio Clock
To enable or disable the radio clock
display:
1. Press until the clock and date
setting menus appear.
2. Press the pushbutton located
under the forward arrow label
until the menu for default clock
and date settings appear.
3. Press the pushbutton located
under the currently displayed
status of either ON or OFF to
toggle the radio clock display on
or off. The ON display indicates
the radio clock display is
disabled and the OFF display
indicates the radio clock display
is enabled.
If the radio clock display is
turned on, the screen
displays Radio Clock ON
for 10 seconds, then
returns to the original clock
display menu.
If the radio clock display is
turned off, the screen
displays Radio Clock OFF
for 10 seconds. The menus
for clock and date settings
are removed, and ON
displays as a current status
indicating that the clock
display can be turned on.
If the radio clock and analog clock
are not synchronized. Use the
procedure below to synchronize
both clocks.

Setting the Digital Radio Clock

Adjusting the Time and Date

1. Turn the ignition key to
ACC/ACCESSORY or ON/RUN,
then press , to turn the
radio on.
2. Press to display HR, MIN,
MM, DD, YYYY (hour, minute,
month, day, and year).
Instruments and Controls
3. Press the pushbutton located
under any one of the labels to be
changed.
4. To increase the time or date,
do one of the following:
Press the pushbutton
below the selected label.
Press
Press
Turn clockwise.
5. To decrease the time or date,
do one of the following:
Press
Press
Turn counter clockwise.
5-9
SEEK.
FWD.
SEEK.
REV.