SAFETY INSTRUCTIONS You have purchased a high quality hi-tech product. Please handle with care and caution. Warning Safety advice Never open the unit. You may risk an Even if the system locks or unlocks electrical shock or damage the sensi- your house or car, you will be held tive parts.
BASICS Technology About biometrics. „Biometrics“ refers to all kind of methods for The BAC-20 / BAC-40 is equipped with a high uniquely recognition of humans based on performance sensor using the latest available one or more specific physical or behavioural technology.
BASICS Applications Applications of Camos systems. BAC-20 / Easy Home Basic BAC-40 / Easy Office Biolock Products have been developed for As explained before, the Easy Office meets Home and Office applications as well as the the same requirements as the Easy Home automotive industry.
FIRST STEPS Shipment Shipment details. Fingerprint reader Controlbox Mounting bracket Reader Main Unit Mounting bracket OPEN Installation material Outdoor reader with mounting bracket and Pluggable screw terminals with 2,4 and 6 rubber fitting pins Controller with mounting bracket and furni- Two-core installation wire, 5 m ture protector Screws and small parts...
Page 7
FIRST STEPS Controlbox Operation of controlbox. All components and settings are prepared to Zeichenerklärung Operating Controls work out of the box after installation. You only have to register the user’s fingerprints. The BAC-20 is absolutely easy to use, where- as the BAC-40 in conjunction with BAC-400 (BMT-215U/40) offers various individual set- tings.
Page 8
FIRST STEPS Installation Reader BMR-207. Step by step guide Position the reader at a hight where every user can comfortably place their finger on the sensor to avoid deviation during reading process. Please use the included drill template for the exact positioning. First fix the rubber fitting and the moun- ting bracket on the wall.
FIRST STEPS Installation Controller BMT-211. Step by step guide Normally, the controller will be installed close to the door. If you need a certain distance, please make sure that the cables between reader and controller are long enough to fix and connect the units as per description.
FIRST STEPS Connectors Safety (Protection against manipulation). If you connect the reader and controller the first time, they exchange a numerical code which contains 12 figures. This code is assi- gned by the controller and stored as long as the units are paired. If the original reader is replaced by another one, all formerly stored templates will be deleted.
FIRST STEPS Delivery status BAC-20 General information. The controller of BAC-20 and BAC-40 con- Backside view control box tains two independently adjustable Outputs (Out 1 & Out 2, see adjoining fig.), as well as 1 Input to connect alarm-/door sensor (Sen- sor Switch).
FIRST STEPS Delivery status BAC-40 Delivery status BAC-40. DIP-Switches (Reader) The delivery condition of BAC-40 is identical to BAC-20. In conjunction with the programmer BMT- 215U/40 you can modify the basic adjust- ments. You will receive detailed information about this chapter in the manual of the BMT- 215U/40.
OPERATION Registration of Fingerprints Registering new fingerprints. Schritt für Schritt Anleitung Step by Step Introduction It is important to understand how the system works and how the fingerprints will be regis- OPEN tered correctly, to make the utilisation as sim- ply as possible.
Page 14
ERSTE SCHRITTE ANWENDUNG OPERATION Lieferzustand BAC-40 Bedienung des Außensensors Correct use of the reader (outdoor unit) How to use the fingerprint reader. Open sensor cover. Blue LED turns on. Place finger smoothly Close sensor cover. and straight. Hints For security reasons there is an inte- grated time-out after 3 seconds.
ANWENDUNG OPERATION Fingerprint enrolment Out 1 & Out 2 Löschen von Fingerabdrücken Fingerprint enrolment Out 1 & Out 2. Step by Step Introduction Out 1: The system is able to recognize if there is a short finger contact (< 3 seconds) or a long finger contact (>...
OPERATION Deleting fingerprint templates Deleting all fingerprint templates. Step by Step Introduction OPEN With the BAC-20 and the BAC-40 (Basic mode) you only have the possibilty to delete all fingerprint templates at once. After this process, the memory is completely empty and all fingerprints have to be regi- stered again.
OPERATION Hardware reset Hardware Reset. Step by Step Introduction OPEN Please use the reset button if you have the feeling that the system doesn‘t react on your commands anymore. The Reset only causes a re-start of the hard- ware. The existent fingerprint templates won‘t be completely deleted.
TECHNICAL DATA Trouble shooting How to solve malfunctions. A sound appears when opening the Sensor When using the system the first time, the control cover. The blue LED is flashing and turning off box will be empty. That is the reason why the sound without having the chance to place your finger appears.
Page 20
Contact address: IMC GmbH, Carl-Zeiss-Str. 7, D-22946 Trittau info@imc-multimedia.com Version 01_20080423 Printed in Korea...