Auto Mode - RealRelax SS01 User Manual

AUTO MODE

Speed Speed
Back Waist
+ -
2
AUTO
Mode Mode
Foot Foot.spd
Buttock Arm Strength +
Calf Shoulder Strength -
Back Back
Heater ZERO-G
Up Down
1
Select Auto massage mode
1.Power: when the unit is turned on it will
automatically start to massage.
In automatic massage modes intensity
and strength cannot be adjusted. If you
would like to adjust intensity and strength
please select a specific area .
such as: arm , foot, or shoulders.
Press "Power" to switch time from 15/20/25/30
Press Power button for 3 seconds to turn o
massage chair
2.Press "AUTO" to switch six modes:
We have six Automatic modes,press "AUTO"
to switch six modes.
3.Auto massge mode will stop automati-
cally after 15/20/25/30 minutes.
Adjusting the reclining angle
Adjust the angle between backrest
and footrest.
Leg extension settings
Footrest unit will automatically extend to
suit taller individvals.
CUSTOM MASSAGE MODE
By selecting a single massage area, auto massage will stop
You can turn on a single massage area, or multiple areas.
This allows you to give yourself a complete customizable massage.
You can also adjust the strength of the air bags and intensity of the rollers.
About the remote control panel
On/O : press power button to turn on the chair or adjust time frame,
press for more than 2 second to turn o .
Back: manual mode up back massage
Back
Waist: manual mode waist massage
Waist
Mode: up back , waist forward and reversal
Mode Mode
Speed + and Speed -: back roller speed adjustment
Speed Speed
+ -
AUTO: auto mode switch
AUTO
Foot and Foot.spd: foot roller and speed adjustment
Foot Foot.spd
Buttock: hips air bag switch
Buttock
Calf: calf air bag switch
Calf
Arm: arm air bag switch
Arm
Shoulder: shoulder air bag switch
Shoulder
Strength + Strength + and Strength -: air bag strength adjustment
Strength -
Heater: turn on heat function
Heater
ZERO-G: recline till zero gravity
ZERO-G
Back Back
Back Up and Back Down: backrest recline and forward adjustment when
Up Down
chair is working(can be adjusted to find the best position for rest when
hand controller is o .)