Maintenance; Troubleshooting; Service Contact Preparation - C.E.C. SuperLink DA SL Owner's Manual

Basic Operation - continued -
Connect a 75 ohm COAXIAL cable between the
BNC-BCK terminal of DA SL and the COAXIAL
output of the CD transport / player.
□ Remove the BNC cable at BNC-BCK terminal for
SUPERLINK if there, then connect a COAXIAL
cable for SPDIF.
□ In case of connecting a RCA cable, use the BNC-
RCA converter plug delivered as accessary in
the box.
WORD
CLOCK
INPUT
44.1kHz MCK
□ Any other terminals than BCK-BNC can keep the
SUPERLINK connections in the SPDIF mode.
Power on the amplifi er lowered the volume.
Set a CD on the CD transport / player and start the
playback.

Maintenance

If the surface of the DA SL case becomes soiled, wipe
with a soft cloth or use diluted neutral cleaning liquid.
Be sure to remove any fluid completely. Do not use
thinner, benzene, alcohol, chemical cloths or bleaching
agents as these may damage the surface of the CD5
case. Also avoid using aerosol insecticides near this
appliance.
DA SL requires no periodic maintenance, and contains
no user-serviceable parts. Contact your dealer or an
authorized CEC service center for an inspection and
repair in case of malfunction.
SUPERLINK
BNC D-SU
BCK LRCK DATA

Troubleshooting

If you suspect a malfunction in this appliance, please
check the following chart before calling your dealer.
Malfunction
Connect completely both ends of the
No power
AC power cord
Correct the connection with CD
transport / player and amplifi er
Select the input connecting with CD
transport / player
No sound
Start the playback
Increase the amplifi er volume
Power on again all the system
Hum noise Connect the RCA plugs completely
Place the player on stable board
Sound skipping
Clean up the disc
Interference on
Install DA SL away or turn off the tuner
tuner
Turn on DA SL
Unresponsive to
Install batteries in the RC unit
remote control
Replace with new batteries
DA SL contains a microcomputer that can malfunction
due to the external noise or interference. If this seems
to be the case, turn the unit off and wait for a short while
before turning it back on and trying again.

Service Contact Preparation

In case you need to contact a service center please
prepare the following information.
Model name and serial number:
Purchase date:
Dealer name and contact information:
Description of the unit's problem:
Solution
11