CANARMNA LPL22A30 Manual

Questions or Concerns Contact At The Following Phone Numbers Before Returning Product To The Store:
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
!
SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
5. WEAR GLOVES AND SAFETY GOGGLES AT ALL TIMES WHEN REMOVING LUMINAIRE FROM CARTON,
INSTALLING, SERVICING OR PERFORMING MAINTENANCE.
6. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in pictures.
INSTALLATION OR ASSEMBLY INSTRUCTIONS:
Installation Manual for Back Lit Flat Panels – Three Options
OPTION I. Installation: Recessed
Wiring diagram 1
Violet(+)
Gray(-)
0-10V Dimmer
PANEL LIGHT
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
1. Remove the ceiling tile at
an appropriate location where
the product is to be installed
and raise the product above
the bar.
2. With power turned off at
the breaker, connect power
to driver based on wiring
diagram.
120 ~277Vac
0-10V / LED Driver
DIM+
DIM-
LED
L
N
N (White)
L (Black)
GND (Yellow/Green)
1
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Gloves
Safety
Scissors
Goggles
3. Fold the 4 protection
brackets so they will be
above the T-bar as shown.
4. Slowly rest the luminaire
on the T-bar and make sure
it fits appropriately.
LPL22A30
LPL14A30
LPL24A40
07/20
Drill