Table of Contents
Advertisement
SECTION H: Belleville Washer Installation:
The bearing support bracket pedestals use belleville spring
washers between the bearing and closure plate at the shaft
extension end. These eliminate the shaft end play and must be
installed correctly as shown in Figures 8 and 9.
FIGURE 9
The normal installation
consists of 2 washers
as shown above.
FIGURE 8
On some models more
spring loading is required
and an extra flat washer is
added as shown above.
SECTION I: REPLACEMENT PARTS
I-1 ORDERING REPLACEMENT PARTS:
When ordering replacement parts, ALWAYS furnish the
following information:
1. Pump serial number and date code.
2. Pump model number.
3. Pump part number.
4. Part description.
5. Item part number.
6. Quantity required.
7. Shipping instructions.
8. Billing Instructions.
IMPORTANT ! When Ordering Parts, ALWAYS Provide The
Complete Part Number, Serial Number and Model Number.
Information Subject To Change Without Notice.
12
1
2
3
Advertisement
Table of Contents
