Advertisement
Quick Links
Table of Contents
Manual turntables
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether
it sustained damage during transport. If damage is discovered, record a complete description of it on the
bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply with
laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Assistance:
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can
also be contacted online at http://www.vestilmfg.com/parts_info.htm.
Parts and
Specifications....................................................................................2, 3, 4, 5, 6, 7, 8, 9,
Signal Words................................................................................................................................................10
Hazards....................................................................................................................................
Record of Normal
Condition..........................................................................................................
Inspections................................................................................................................................
Labeling
Diagram.......................................................................................................................
Limited Warranty (models ending with –PED, -DPED, -CPED, and CDPED
Limited Warranty (models without
Table of Contents
2/19/2019
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Web:
www.vestilmfg.com
TT Series Benchtop Turntables
Instruction Manual
Manual turntable on
manually adjusted
pedestal
Table of Contents
pedestal).....................................................................................
Copyright 2017 Vestil Manufacturing Corp.
Vestil Manufacturing Corp.
Fax: (260) 665-1339
suffices)...............................
TT MANUAL
Email:
info@vestil.com
Manual turntable on gas
cylinder adjusted
pedestal
Page 1 of 13
10
11
11
11
11
12
13
Advertisement
Summary of Contents for Vestil TT Series
- Page 1 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 Web: www.vestilmfg.com Email: info@vestil.com TT Series Benchtop Turntables Instruction Manual Manual turntable on gas Manual turntables Manual turntable on cylinder adjusted manually adjusted...
-
Page 2: Parts And Specifications
20-024-011 Guard, cover, mat Uniform capacity = 500 lb. Turntable diameter = 12” Overall height ” Top plate thickness ” Net weight = 12.3 lb. Rubber cover on top plate. Table of Contents Copyright 2017 Vestil Manufacturing Corp. Page 2 of 13... - Page 3 20-024-008 Guard, cover, mat Uniform capacity = 1,000 lb. Turntable diameter = 18” Overall height ” Top plate thickness ” Net weight = 25.3 lb. Rubber cover on top plate. Table of Contents Copyright 2017 Vestil Manufacturing Corp. Page 3 of 13...
- Page 4 = 70.6 lb. Rubber cover on top plate. Manual height adjustment with knob tensioner. To adjust tabletop height, loosen knob, position tabletop at desired level; then retighten knob. Table of Contents Copyright 2017 Vestil Manufacturing Corp. Page 4 of 13...
- Page 5 Gas cylinder for height adjustment. To raise cylinder, press cylinder lever up. Release lever when tabletop achieves desired height. To lower tabletop, press lever up and apply weight to tabletop. Table of Contents Copyright 2017 Vestil Manufacturing Corp. Page 5 of 13...
- Page 6 Flat head socket cap screw, 24214 #10-32 x 1 ” 37015 10-32 Nylock nut, zinc-plated Flat socket cap screw, class 39956 10.9, black oxide finish, M6- 1.0x25mm 20-024-012 Guard, cover, mat Table of Contents Copyright 2017 Vestil Manufacturing Corp. Page 6 of 13...
- Page 7 Top plate thickness ” Net weight = 91.8 lb. Rubber cover on top plate. Gas cylinder for height adjustment. (See TT- N-24-CDPED for description of gas cylinder operation). Table of Contents Copyright 2017 Vestil Manufacturing Corp. Page 7 of 13...
- Page 8 Part no. Description Qty. 20-514-010 Weldment, frame, base 20-513-061 Weldment, deck 99-110-006 Bearing, ball, ” 20-014-028 Frame, inner shaft 99-025-002 Knob, ” x 2 ” 20-024-012 Guard, cover, mat Table of Contents Copyright 2017 Vestil Manufacturing Corp. Page 8 of 13...
- Page 9 Flat head socket cap screw, #10-32 x 1 ” 37015 10-32 lock nut, zinc-plated Flat socket cap screw, class 10.9, black oxide 39956 finish, M6-1.0x25mm 20-024-013 Guard, cover, mat Table of Contents Copyright 2017 Vestil Manufacturing Corp. Page 9 of 13...
-
Page 10: Signal Words
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS INJURY. Identifies practices likely to result in product or property damage, such as operation that might damage the product. Table of Contents Copyright 2017 Vestil Manufacturing Corp. Page 10 of 13... -
Page 11: Labeling Diagram
• DO NOT use the turntable if any label is unreadable, damaged, or missing. See Labeling diagram on p. 11. Contact Vestil for replacement labels. • DO NOT modify the turntable in any. Modifications might make the crane unsafe to use and automatically void the limited warranty. See appropriate Limited Warranty on p. -
Page 12: Limited Warranty
Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid. - Page 13 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.