Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Centrios 6311511
- Page 1 6311511 Weather station with In/Out Temperature and Atomic clock...
- Page 2 INTRODUCTION Thank you for selecting this CentriosTM Weather clock. This clock is supplied with a remote sensor and can support up to 3 sensors in total (additional sensors sold separately). The sensor is a product of break through technology, withstanding deep freeze temperatures of - 40°C! NOTE: Please keep this manual handy as...
- Page 3 OVERVIEW Front View- Main Unit 1. SNOOZE. 2. MODE: Change settings / display. 3. MEM: View current, maximum and minimum temperature. 4. CHANNEL: Switch remote sensor display.
- Page 4 OVERVIEW Back View- Main Unit 1. RESET: Reset unit to default setting. 2. 3 Alarm: View alarm status; set alarm. 3. 3 Alarm ON / OFF: toggle alarm ON / OFF. 4. e / d : Increase / decrease setting; activate / deactivate clock reception signal;...
-
Page 5: Lcd Display
LCD DISPLAY 1. Weather forecast 2. Sensor reception icon 3. Remote unit battery low 4. Max / min outdoor temperature 5. Outdoor temperature 6. Alarm set 7. Clock reception icon 8. Alarm mode icon 9. Date 10. Main unit battery low 11. -
Page 6: Remote Sensor
REMOTE SENSOR FRONT BACK 1. LED status 1. Wall mount hole indicator 2. RESET 3. Battery compartment 4. Battery door 5. Channel Switch... -
Page 7: Getting Started
GETTING STARTED MAIN UNIT Insert batteries before first use, matching the polarity (+ and -) as indicated. To insert the main unit batteries: 1. Open the battery compartment. 2. Insert the batteries, matching the polarity (+ / -). 3. Close the battery compartment. NOTE: Do not use rechargeable batteries. -
Page 8: Sensor Setup
SENSOR SET UP To set up the sensor: 1. Slide open the battery compartment. 2. Insert the batteries, matching the polarity (+ / -). 3. Set the channel switch. Select a different channel for each sensor. 4. Place the sensor near the main unit and press RESET on the sensor. - Page 9 SENSOR SET UP For best results: • Place the sensor out of direct sunlight and moisture. • Do not place the sensor more than 30 meters (98 feet) from the main (indoor) unit. • Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture.
-
Page 10: Clock Reception
CLOCK RECEPTION This product is designed to synchronize its calendar clock automatically once it is brought within range of the WWVB-60 radio signal generated from the atomic clock in Fort Collins, Colorado. The clock receives the radio signals whenever it is within 3200 km (2000 miles) of a signal. To set the clock to your local time zone see Set Clock. -
Page 11: Set Clock
SET CLOCK 1. Press and hold MODE for 2 seconds. 2. Select the time zone (see below), hour, minute, year, month, day and language. Press e or d to change the setting. 3. Press MODE to confirm. NOTE: The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. - Page 12 SET CLOCK Alaskan Set clock manually Pacific Mountain Central Eastern Atlantic Set clock manually Newfoundland Set clock manually NOTE: Alaskan, Newfoundland and Atlantic time zones cannot be set, please turn clock reception OFF and set the clock manually. To toggle clock reception ON / OFF: To turn ON, press and hold the e button for 2 seconds.
- Page 13 ALARM To set the alarm: 1. Press 3 to view alarm display. 2. Press and hold 3 for 2 seconds. 3. Press e or d to set alarm time. 4. Press 3 to confirm. 3 indicates alarm is To toggle alarm ON / OFF: 1.
-
Page 14: Weather Forecast
WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius based on barometric pressure trend readings. Clear Partially Cloudy Cloudy Rainy WEATHER FORECAST MAXIMUM/MINIMUM RECORDS To view records: 1. Press CHANNEL to select a sensor. 2. - Page 15 SENSOR Data is sent from the sensor every 40 seconds. The sensor LED fl ashes when data is being transmitted. The clock signal reception icon indicates reception status. Main unit searching for sensors At least one channel found Channel 1 selected shows in No signal received remote unit area...
-
Page 16: Search For Sensor
SEARCH FOR SENSOR 1. Press and hold CHANNEL and MEM simultaneously. NOTE: If the sensor is still not found, check the batteries, obstructions, and remote unit location. To manually select sensor: Press CHANNEL to toggle between sensor channels 1-3. To activate auto-scan between sensors: 1. -
Page 17: Moon Phase
MOON PHASE • When the calendar is set press e or d to view the moon phase for the next/previous day. • Press and hold e or d to scan through the years (2001 to 2099). New Moon Waxing Crescent First Quarter Waxing Gibbous Full Moon... - Page 18 PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: • Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts.
-
Page 19: Specifications
SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT L x W x H 161 x 87 x 28 mm (6.57 x 3.55 x 1.14 in) Weight 189 g (6.67 oz) without battery Temp. unit ºC (or ºF by factory default) Operating temp. -5ºC to 50ºC range (23ºF to 122ºF) Resolution... -
Page 20: Industry Canada Statement
INDUSTRY CANADA STATEMENT Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IC: 3277A-BAR182A IC: 3277A-THGN123N... -
Page 21: Fcc Statement
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. - Page 22 LIMITED WARRANTY ORBYX ELECTRONICS WARRANTY Who is Providing This Warranty? • Orbyx Electronics, LLC (“Orbyx”), as the distributor of this CentriosTM product (your “Product”). What Does This Warranty Cover? • This warranty covers defects in materials or workmanship in your Product under normal use and conditions.
- Page 23 LIMITED WARRANTY ORBYX ELECTRONICS WARRANTY ORBYTX Electronics warrants that this product will be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. Within this period, simply take the product and your proof of purchase to any ORBYX Electronics store or dealer and the product will be repaired without charge for parts and labour.
Need help?
Do you have a question about the 6311511 and is the answer not in the manual?
Questions and answers