Summary of Contents for DIGITAL ALLTEK WI-CONNECT PRO
- Page 1 Installation & Quick Start Guide WI-CONNECT PRO Wireless Adaptor/Antenna QUICK START WI-CONNECT PRO PRO- VR2.00...
- Page 2 Route the USB lead through to the computer that you wish to connect the WI-CONNECT PRO to but do not plug the USB lead in to the computer. Proceed to the relevant “Getting Started Guide” section of this guide, that is applicable to the operating system you are using.
- Page 3 Memory Stick. It is very important that you do not plug the WI-CONNECT PRO in to a USB port on your computer unless you have the WI-CONNECT PRO Drivers Memory Stick inserted in your PC. By plugging in the WI-CONNECT PRO you will initiate the Windows “Found New Hardware Wizard”...
- Page 4 Fig 9. When completed the pop up will change to the one shown in Fig 10, saying that the device software has been installed successfully. The WI-CONNECT PRO drivers and Realtek Wireless LAN utility are now installed. Figure 7...
- Page 5 IMPORTANT NOTE - It is always best to turn off (disable) the internal wireless adaptor on your laptop before using the WI-CONNECT PRO. The exact method to do this, varies from PC to PC, but some laptops have a dedicated button in or around the keyboard area or a special keyboard combination e.g.
- Page 6 6. Installing and Operating the WI-CONNECT PRO on a Mac Insert the WI-CONNECT PRO Drivers/Software Memory Stick in to your Apple Mac and using Finder open the folder called MacOS10.4, MacOS10.5, MacOS10.6 or MacOS10.7 depending upon the version of Mac OS X you have.
- Page 7 Figure 25 Once the Mac has restarted, plug the WI-CONNECT PRO in to a free USB port on the Mac and two things will happen. A new Icon will appear in the Dock – as shown in Fig 26. Also a new application will open and a window similar to the one in Fig 27 will be displayed –...
- Page 8 Select the wireless network that you want to connect to and click “Connect”. You will now see a window like the one shown in Fig 29. Enter the password of the network (if applicable) and click “OK”. The WI-CONNECT PRO should now connect to the selected wireless network and display the General Status tab shown in Fig 30.
Need help?
Do you have a question about the WI-CONNECT PRO and is the answer not in the manual?
Questions and answers