Advertisement
1. Overlay information
For reference only. The image on the left explains the correlation between the temperature scale
and the pairing scale. To be used for the initial set-up or in case of lost link error. Please keep the
sticker on until installation is complete.
2. LED indication
LED
Meaning
Before pairing
Wanting to join network
Joined the network
successfully
*Pairing complete
Wiring centre number
selection OK
Wiring centre group
selection OK
Wiring centre zone selection
OK
Identify process ON
* Only in offline mode
Note: When thermostat is calling for heat,
the LED will be OFF. If you encounter the
lost link error, repeat the pairing procedure.
LED
Meaning
Error codes
Lost connection with
Quantum coordinator /
Quantum wiring centre-RF /
Quantum hub
Quantum dial thermostat-RF
has been reset
Low battery
Air sensor is too short or
open
Pairing failed
Error when trying to add two
Quantum dial thermostat-RF
to the same wiring centre
zone
- Device reset;
- After pairing in online mode:
data being sent to the cloud
U N D E R F L O O R H E A T I N G
Advertisement
