Dell Precision 7920 Rac Installation Manual page 10

Installing system cover
Prerequisites
1. Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the slots on the system.
2. Push the system cover latch down.
3. Using a flat head screwdriver, rotate the latch release lock clockwise to the locked position.
Next steps
1. Reconnect the peripherals and connect the system to the electrical outlet.
2. Turn on the system, including any attached peripherals.
GPU Host Card Installation
This section describes the following hardware installation processes
NVIDIA A6000 Graphics Card Installation
Steps
1. Connect the GPU power cable to the connector on the system board.
NOTE:
While installing a GPU on riser 1, connect the GPU power cable to the connector on riser 1 and route the cable through
the slot on the GPU air shroud.
While installing a GPU on risers 2 or riser 3, connect the GPU power cable to the connector on the system board.
10 Field service information