Specifications; Operational Instructions - Solter AUTONOMY 3500 Manual

APPLIANCE
• A truly portable AUTONOMY 3500 is ideal for anyone needing a AUTONOMY 3500.
Applications include boats, cars, generators and more fully compatible with any 12
volt starting system. AUTONOMY 3500 utilizes a MAINTENANCE FREE SEALED
BATTERY which allows the unit to be stored in any position, anywhere, without fear of
leakage, AUTONOMY 3500 conveniently stores under or behind a seat, or where is
handy.
FOR PROPER MAINTENANCE IS ESSENTIAL TO CHARGE THE
BATTERY FOR 48 HOURS EVERY 2 MONTHS.

SPECIFICATIONS

1. Battery: 12V/22Ah
2. Output voltage: 12V DC
3. Output from cigar lighter socket: 12VDC, <15AMP
4. Charging:12VDC/500mA

OPERATIONAL INSTRUCTIONS

1. START ENGINES:
1. Switch the engine of the vehicle to be jump-started to "OFF".
2. Connect the RED clamp to the positive (+) battery terminal.
3. Connect the BLACK clamp to negative (-) battery terminal.
4. Switch the vehicle ignition to "ON"
5. Wait one or two minutes.
6. Switch the vehicle ignition to start for no more than 5 or 6 seconds.
7. If the vehicle engine does not start, wait al least 3 minutes before trying again
8. Once the engine is running, disconnect the positive (RED) clamp first and return this
cable to its store position. Disconnect the negative (BLACK) clamp, and return it to its
stored position. Under no circumstances allow the red and black clamp to touch each
other or a common conductor.
9. Plug the booster to the charger at 230V.
BATTERY STARTER
ATENCIÓN
MI03045-04