Installation Diagram - FARFISA INTERCOMS FC52MAS Manual

ACCESS CONTROL KEYPAD
The keypad allows for the activation of 2
relays with programmable codes.
Technical data
Power supply
Stand-by current
Maximum current consumption
Contact ratings
Number of codes for relay 1
Number of codes for relay 2
Activation time for each relay from 1 to 99 sec.
Operating temperature
Maximum allowable humidity 85% RH
Degree of protection
Terminals
normally closed contact of relay 2
2 normally open contact of relay 2
common contact of relay 2
normally closed contact of relay 1
1 normally open contact of relay 1
common contact of relay 1
ground or alternate voltage input
positive or alternate voltage input
P2 activation of the relay 2; if momentarily
connected to ground it allows the activa-
tion for the programmed time
P1 activation of the relay 1; if momentarily
connected to ground it allows the activa-
tion for the programmed time

INSTALLATION DIAGRAM

PROGRAMMING
Default programming
The article is supplied from the factory with
the following codes:
Programming code:
Activation code 1 of relay 1:
Other activation codes of relay 1
(from 2 to 12):
Activation time code of relay 1: 01 (1 sec.)
Operating mode of relay 1: 00 (monostable)
Activation code 1 of relay 2:
Other activation codes of relay 2
(from 2 to 12):
Activation time code of relay 2: 01 (1 sec.)
Operating mode of relay 2: 00 (monostable)
All codes are user-modifiable.
English
Operating modes and programming codes
Monostable
Bistable
Monostable and direct activat. by key A 02
12Vac/dc ±10%
Bistable and direct activation by key A
0.02A
0.1A
Changing the programming code
12Vac - 2A
To change the programming code:
12 (+ direct
- enter the actual programming code
activation)
- press key A (red LED flashes)
12 (+ direct
- enter 00
activation)
- press key A (red LED on)
- enter the new programming code with 1 to 8
(or bistable)
digits (from 0 to 99999999)
0° ÷ +40°C
- press key A (red LED flashes)
IP 45 - enter 55
- press key A (red LED off).
Changing the activation codes of relay 1
To change the activation codes of relay 1:
- enter the programming code
- press key A (red LED flashes)
- enter 01 (identification code of relay 1)
- press key A (red LED on)
- enter a number with 1 to 8 digits to pro-
gramme code 1 (from 0 to 99999999)
- press key A
- enter a number with 1 to 8 digits to pro-
gramme code 2 (from 0 to 99999999)
- press key A
- enter a number with 1 to 8 digits to pro-
gramme code 3 (from 0 to 99999999)
- press key A
- repeat the operation to programme all codes
as necessary (max.12). When program-
ming is completed press key A repeatedly
until the red LED starts flashing
- enter 55
- press A (red LED off).
Changing the activation codes of relay 2
To change the activation codes of relay 2
follow the procedure described above, chang-
ing the relay identification code (02 instead of
01).
Changing one relay activation code
To change one relay activation code, without
modifying the others:
11
- enter the programming code
12345678
- press key A (red LED flashes)
- enter 01 or 02 (for relay 1 or 2, respectively)
none
- press key A (red LED on)
- press key A repeatedly to reach the code to
be changed
90
- enter a number with 1 to 8 digits (from 0 to
99999999)
none
- press key A repeatedly until the red LED
starts flashing
- enter 55
- press key A (red LED off).
Example
00 To change activation code 7 of relay 2:
01 - enter the programming code
- press key A (red LED flashes)
03 - enter 02
- press key A (red LED on)
- press key A six times
- enter a number with 1 to 8 digits
- press key A six times (red LED flashes)
- enter 55
- press key A (red LED off).
Deleting one relay activation code
To delete one relay activation code, without
modifying the others:
- enter the programming code
- press key A (red LED flashes)
- enter 90
- press key A (red LED on)
- enter a 3-digit number "nxx"; n indicates the
relay associated with the code to be deleted
(1 or 2); xx indicates the code to be deleted
(from 01 to 12)
- press key A (red LED flashes)
- enter 55
- press key A (red LED off).
Changing the relay activation time and mode
To change the relay activation time and mode:
- enter the programming code
- press key A (red LED flashes)
- enter 03
- press key A (red LED on)
- enter a number from 00 to 99 to programme
activation time of relay 1 (enter 00 to deac-
tivate the relay)
- press key A
- enter a number from 00 to 99 to programme
activation time of relay 2 (enter 00 to deac-
tivate the relay)
- press key A
- enter a number from 00 to 03 to programme
activation mode of relay 1 (for code selec-
tion refer to "operating modes and program-
ming codes")
- press key A
- enter a number from 00 to 03 to programme
activation mode of relay 2 (for code selec-
tion refer to "operating modes and program-
ming codes")
- press key A (red LED flashes)
- enter 55
- press key A (red LED off)
Mi 2296/1 - 3 -