hager EG403E User Instructions

EG403E
Presentation
⦁ Product delivered with current time and date set.
⦁ Automatic change of summer/winter time.
⦁ Programming key
- For permanent overrides
- For program copy or save
⦁ 300 programme steps ; ON, OFF , pulses
⦁ Permanent overrides On or Off (
⦁ Temporary overrides On or Off (
⦁ Overrides (temporary, permanent or time delayed) remote activation possible.
⦁ Simulation of presence .
⦁ Keyboard lock function by PIN number.
⦁ Counter of operating time on every output.
⦁ Programmable with power off.
⦁ Display with backlight.
Product Presentation
Selection of days of the week
1 = Monday, 2 = Tuesday
... 7 = Sunday.
DCF Antenna (option)
Enter in PROGRAMME mode &
return to previous step
Connection diagram
L
Œ
N
EG001
1 3 5 7 9 11 13 15
C D
EG403E
A B
2 4 6 8 10 12 14 16
1
4 channel programmer
§
weekly cycle with
programming key
or .
permanent light on).
flashing).
menu +
ok
Navigation &
value setting

Canal A command
Canal B command
Canal C command
Canal D command
Keyboard locked by PIN code
Validation
Œ
Input for external override

Option
User instructions
Technical specifications
Electrical characteristics
• Supply voltage
• Frequency
• Power consumption
• Output 2 changeover
• Maximum load
AC1
Incandescent lighting:
Halogen lighting
Compensated fluorescent tubes //
(max. 45 µF)
Non compensated fluorescent tubes,
compensated in series
Compact fluorescent lamps
• Minimum load
AC1 100 mA
• Galvanic insulation between power supply and
output
Rated impulse voltage
•
Functional characteristics
• Programming capacity
• Minimum time between 2 steps
• Running accuracy
• Operating reserve lithium battery, total of 5
years autonomy (unlimited programme backup)
• The product is set into standby state (display
switched-off) after 1 minute with power off.
It switches back into automatic mode as soon
as power is back on or when pressing any key.
• Protection degree
Action type
•
Degree of pollution
•
Software class
•
Environment
• Operating temperature
• Storage temperature
Temperature for the ball pressure Test
•
Connection by quick-connect terminals
• Flexible
• Rigid
Standards
60730-1
60730-2-7
å
Usable in all Europe and in Switzerland
This device must be installed only by
a qualified electrician according to the
installation standards in force in the
country.
Warranty NOT APPLICABLE FOR AUSTRALIA
§
A warranty period of 24 months is offered on hager
products, from date of manufacture, relating to any material
of manufacturing defect. If any product is found to be
defective it must be returned via the installer and supplier
(wholesaler). The warranty is withdrawn if:
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary
to IEE wiring regulations and accepted practice within the
industry at the time of installation.
- The procedure for the return of goods has not been
followed. Explanation of defect must be included when
returning goods.
+
230 V 10/-15%
50/60 Hz
< 2 VA
+
2 NO contacts
~
µ 10A 250 V
1500 W
400 W
1000 W
400 W
~
250 V
< 4 kV
4 kV
300 steps
1 minute
± 0,2 sec/ 24h
IP 20 / IK 04
1B
2
A
+
-10 °C to 50 °C
-20 °C to + 70 °C
75° to 125°C
0,75 to 2,5 mm
2
0,75 to 2,5 mm
2
6E 6354E