Whirlpool WCE97US0K User Instructions page 5

36" (91.4 cm) Model WCE97US6K Touch-Activated Electronic Control Model shown
A. Ceramic glass cooktop
B. 6" (15.2 cm) single element
C. 12"/10"/6" (30.5 cm/25.4 cm/15.2 cm)
D. Right rear warming zone
COOKTOP CONTROLS – ELECTRONIC TOUCH
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The electronic touch controls offer a variety of heat settings
for optimal cooking results.
For maximum element operation, all cooktop electronic touch
controls can be set to High when bringing liquids to a rapid boil.
When the cooktop is turned on or after power is restored to the
cooktop after a power failure, all temperature setting lights will
glow for 10-15 seconds. After the lights go off, the cooktop is
ready to use.
To Use:
B
A
H
DUA L E L E M E N T
G
triple element
CONTROLS
Cooktop Controls
C
T R I PL E E L E M E N T
ON ON ZONE WARM
OK
OFF OFF SIZE ZONE
ON ZONE ON
OFF SIZE OFF
Hold Timer
3 sec
F
E. 6" (15.2 cm) single element
F. Control panel
G. 10"/6" (25.4 cm/15.2 cm)
dual element
H. Model and serial number plate (located
underneath cooktop on metal cabinet)
1. Touch ON/OFF for the desired element.
2. Touch the UP or DOWN keypad to select the power level.
NOTE: Press the "+" (plus) or "-" (minus) keypads to increase
or decrease power one level at a time. If a power level is not
selected within approximately 10 seconds, the element will not
turn on.
3. To change the power level while cooking, select a power level
with the UP or DOWN keypad.
4. When finished cooking, touch ON/OFF for the desired element
to turn off surface cooking area(s) individually or touch OFF to
turn off all surface cooking areas at once.
D
WA R M ZO N E
E
5