KNOVA KN IW-1010 Manual page 3

SAVE THESE INSTRUCTIONS
Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
tools operation. If damaged, have the tool
serivced before using.Many accidents are
caused by poorly maintained tools.
Use only accessories recommended by
the manufacturer for your model.
Accessories that are suitable for one
tools, may become hazards when used
with another tool.
APPLICATION
Tool can be used for tire changing, shock
absorber replacement, exhaust system work,
lawn mower repair and small engine work, as-
sembling and disassembly the bolt and nut.
B
Reverse (R)
Forward (F)
Install/Remove sockets or Accessories [C]
To install a socket on the anvil, align the hole of the socket
To remove a socket from the anvil, pull the socket out firmly.
with the anvil and push down firmly.
Addition
Waring: (1)Please stop the tool when you
want to change the running direction and
change by pressing switch. (2)The troque
will vary bigger from longer running time.
When you want to assemble or
unassemble a bolt, you want keep the tool
running more than 5S. But when keeping
running more than 5S, it is not meaning
the toruqe will be bigger and bigger.
Anvil
Switch
Switch [B]
Your tool starts or stops by depressing and
releasing the rocker switch. Press the button
of the switch to go forward (clockwise).
Press the top of the switch to reverse
(go counter-clockwise).
A
C