Fitting The Harness; Balancing The Machine - Stihl KB Instruction Manual

Fitting the Harness*

Shoulder Strap
: Put on the shoulder strap (1).
: Adjust length of strap until the spring
hook (2) is about a hand's width
below your right hip.
: Balance the PowerSweep –
see "Balancing the Machine".
* See "Guide to Using this Manual"
KB, KW

Balancing the Machine

Attaching Shoulder Strap* to the
Machine
: Attach the spring hook (1) to the
clamp (2) (carrying ring*).
* see "Guide to Using this Manual"
English / USA
3
: Loosen the screw (3).
Balancing the Machine
: Slide the clamp up or down the drive
tube until the sweeping tools touch
the ground.
: Tighten down the clamp screw
firmly.
17