Page 2
LoJack ATS100 LTE Installation Guide (Standard) GPS Device Installation Options: 1. The standard installation simply hard-wires to the vehicle. ATS100 supports both 2-wire and OBD passthrough install methods. Ground Constant 12V LED Indicators Cut here for Standard Installation (Do not cut when using preinstall or OBDII Harness)
Page 3
LoJack ATS100 LTE Installation Guide (Standard) GPS Device Optional OBDii Pass-through Cable Installation Instructions: 1. Unclip or unscrew the vehicle’s stock OBDii plug from its mounting location. 2. Plug the OBDii pass-through cable into the stock OBDii port and clip or screw the opposite end into the stock plug’s original mounting location using the supplied bracket where necessary.