This 4x4 Video Matrix allows un-compressed HDMI and two-way IR signals to be transmitted via a single CAT5e/6/7 cable; over distances of up to seventy metres from any of the four inputs to any of the four outputs. SAFETY PRECAUTIONS Please read all instructions before attempting to install or operate this equipment.
INITIAL SETUP CONNECTING YOUR RECEIVERS 48V DC - Connect to power supply The power supply included with the chassis is designed especially for this product, do not use any other power supply with this product. Link Power Ethernet - Connect to your home router Use a standard Cat5e (or higher grade) cable to provide internet access to the matrix.
MATRIX FRONT PANEL DISCOVERING YOUR MATRIX System Health LED Your matrix is pre-configered to request and IP address from a local DHCP server The LED should be green at all times while (this is usually your internet router). If this fails, you can run our discovery tool, the matrix is turned on.
TROUBLESHOOTING TECHNICAL SPECIFICATIONS Matrix Should you encounter installation difficulties or issues with device communication, the Input 4× HDMI, 4× IR Receiver following checklist of common issues and causes should help resolve your issues. Output 4× RJ45, 4× IR Emitter If you still continue to experience issues, please contact your place of purchase. Receiver Input 1×...
WARRANTY Antiference offer a 2 year warranty on this product, to activate your warranty you must connect your Matrix to your router on initial set up for a minimum of 2 hours, we recommend that you leave your Matrix connected to the router permanently as the product will make a call back every hour for health checks.
Page 7
TRUCOLOUR Antiference Ltd, Fradley Distribution Park Wood End Lane, Fradley Park, Lichfield, Staffs, WS13 8NE...
Need help?
Do you have a question about the TRUCOLOUR and is the answer not in the manual?
Questions and answers