Remove Transport Locks; Run - Siemens WM14N005NL User Manual And Installation Manual

Remove transport locks

The device is secured for transport
with a transport lock at the rear of the
device.
Clues
¡ Take the information about the
subject security → Page 4 and
avoid damage
→
Page 12 be aware of your appli-
to use safely.
¡ Keep the transport safeguards,
the bolts and sleeves for future
transport → Page 52.
Pull the hoses out of the holders.
1.
Loosen and remove all bolts of the
2.
4 transport locks with a SW13
open-end wrench
.
2
Pull the mains connection cable out of the
3.
holder.
1
Set up and connect NL
Remove the 4 sleeves.
4.
Install the 4 cover caps.
5.
The 4 cover caps downwards
6.
downwards.
17