Advertisement
B
C
D
A
The Priovino Classic
is so easy to use
Set-up and operation
1.
Plug the device into an electrical
socket using the power cord.
2.
Switch on the device using the
On/Off button (
) – blue digital
A
temperature display lights up.
3.
Press the set button (
) –
B
the display begins to flash.
4.
Use the plus (
)/minus (
)
C
D
buttons to enter the desired
temperature.
5.
Press set button (
) once again
B
to confirm the temperature
setting – the display stops flashing.
6.
The desired temperature setting
will now be seen in the display.
7.
Place the wine bottle in the
bottle chamber.
Cleaning
Clean the device with a soft,
damp cloth and then dry all
surfaces thoroughly.
Charging the battery (for devices
equipped with a battery)
1. Insert the charger plug of the
battery charger into the socket
on the underside of the cooler.
2. Plug the battery charger into an
electrical socket using the power
cord. The lower LED will light
up in red.
3. While the battery is being charged,
the upper LED flashes in green.
Once charging is completed,
the green LED stops flashing.
4. Disconnect the battery charger
from mains power and then from
the device.
5. When the battery is down to 15 %
of full capacity, a blue LED lights
up behind the air vents.
Should you have any difficulties
with the operation of the device,
please contact us at the following
email address:
moritz.ortwein@priovino.com
Advertisement
