Panasonic YD-500GP5 Operating Instructions Manual page 38

【Arc control】
NO. Menu contents
Arc ignition
P01 energy
compensation
Arc ignition
P02 voltage
compensation
Arc ignition time
P03
compensation
【Pulse control】
NO. Menu contents
Dual-pulse
※
P15 frequency
Low pulse
P16
duty ratio
Low pulse
P17
current
low pulse
P18
voltage
Double pulse
P19
(MUP) enabled
※5 Double pulse: In the original pulse (high pulse part), based on the increase in the low pulse part.c
Set range Increment
-50～50
-5～5
-50～50
Set range Increment
5
-5 Hz～5 Hz 0.1Hz
-50～50
-50～200
-9.9V～9.9V 0.1V
0 1 or 2
Settings
Default
Fine adjustment of peak current of arc.
1 0 It increases when the direction is adjusted
Fine adjustment of the arc voltage value.
The peak current of the arc is increased
1 0.1
when the direction is adjusted positive
The role of micro-adjustment of the arc
1 0
Positive value direction of the arc voltage
Default
0
the second pulse output duty ratio.
1 50
1 120
Voltage compensation for the unified voltage.
0V
1 0
34
Note
positive value.
value.
voltage.
adjustment time longer.
Note
Low pulse current set point.
0: normal pulse
1:double pulse
2:pulse + Short circuit