Safety Instructions ● Do not soak the weather station in the water. ● Do not tamper with the internal components of the weather station. ● Do not mix different kind of batteries with this product. ● Keep the weather station away from extreme force or sharpness. ●...
Page 3
At a Glance COMFORT F O R E C AS T Part A – Positive LCD A1: RCC& DST signal flag A9: Weather Forecasting A2: Time A10: Histogram shows the trend of 24 A3: Moon Phase hours of atmospheric pressure A4: Calendar or Alarm time A11: Barometric pressure A5: Week...
Part C – Wireless Outdoor Sensor C1: LCD display – Temperature C5: “TX” button C2: LCD display – Humidity C6: Channel selector switch C3: Transmit signal LED C7: Battery compartment C4: “°C/°F” button Using Your Weather Station Reception of the WWVB Signal ❶...
Pairing the Indoor Device with the Outdoor Sensor ❶ Press and hold “▼” button on main unit for over 3 seconds until “ ” flashes. ❷ Press “▼” button again to select the pairing channel. ❸ Switch channel button “ ”...
Page 6
● Press “ ” to confirm your setting, the Minute displays starts to flash. Now use“▲” and “▼” buttons to set the correct minute. ● Press “ ” button to confirm your setting, the Month and Date icon display starts to flash.
● Press “ ” button to confirm your setting, the Minute will start to flash, and then press the “▲” and “▼” buttons to set the required minute. ● Press “ ” button to confirm your setting, the snooze time will start to flash, and then press the “▲”...
Trend Display ● The current indoor temperature/humidity and the trends are shown in the LCD display. ● After successfully connecting with the outdoor sensor, the weather station can display the outdoor temperature/humidity and the trends. ● You may see the following displays: The trend of the temperature/humidity is rising.
Temperature and Frost Alert ● Press “ ” button to activate or deactivate the remote temperature alert, when the remote temperature alarm is activated, the temperature alarm icon will be displayed in the remote sensor bar. ● When the remote channel temperature exceeds the set temperature range, the alarm will be activated.
Background Lighting ● If the product is powered by batteries, touch the “ ” field or press the “ ” button to lighting up. ● If the the Weather Station is powered by the adapter, the backlight will remains bright. Press the “...
Troubleshooting ❶ The display does not remain bright If the the Weather Station is powered by the adapter, the backlight will remains bright. If the product is powered by batteries, touch the “ ” field or press the “ ” button.
Need help?
Do you have a question about the H5172 and is the answer not in the manual?
Questions and answers