SignWall is the ultimate solution for the display and management of your digital content. It is highly cost effective and easy to use. It is perfect for both small- scale and large-scale projects.
Limited Warranty Statement Extent of Limited Warranty SmartAVI, Inc. warrants to the end-user customers that the SmartAVI product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by the customer.
Page 4
What’s in the Box? PART NO. QTY DESCRIPTION AP-SVW-120G5 SignWall Video Wall Player with 120GB Disk, 4GB RAM, i5 - Figure A CCPWR06 6ft Power Cable - Figure B CCVHDCI4DVI VHDCI to 4-Port DVI Breakout Adapter for Radeon HD 5570...
Page 5
Introduction SignWall is powered by Windows 7 on a blazing fast Intel Core i5 or Core i7 processor with 4GB of RAM and a Solid State Drive (SSD). This combined with a VisionTek AMD Radeon™ HD 5570 1GB SFF 4-Port DVI-D video processor gives SignWall the power to display seamless full HD 1920x1200 video on 4 displays.
Included EDID-Mirror-4P EDID Emulator The EDID-Mirror is a DVI-D EDID (Extended Display Identification Data) emulator that supports up to 4 DVI-D displays. EDID-Mirror will learn and emulate the EDID configuration of the displays, so that the displays can be disconnected without losing their configuration. The EDID information stores the resolution and timing information for each connected display.
EDID-Mirror-4P FRONT of 2X2 Video Wall 1. Connect all the DVI-D cables from the SignWall processor to the EDID-Mirror-4P and to the Video Wall as shown in the above diagram. 2. Plug in the green ASUSBKEY to any available USB port.
FRONT of 2X2 Video Wall Connecting the Hardware 1. Connect all the DVI-D cables from the SignWall processor to the EDID-Mirror-4P and to the Video Wall as shown in the above diagram. 2. Plug in the green ASUSBKEY to any available USB port.
Page 10
Learning the EDID with the EDID-Mirror-4P 1. The activity lights on the EDID-Mirror-4P will be steadily illuminated. 2. Press and hold the LEARN button until both the activity lights turn off. (approximately 2 seconds) 3. Release the LEARN button. 4. The activity lights will blink slowly while the EDID is learned. 5. When the learning is completed, both activity lights will quickly blink alternately indicating that the EDID has been learned.
Page 11
3. Go to AMD Eyefinity Multi-Display -> Create Eyefinity Display Group 4. Select 4 Displays (2x2) 5. Click Continue www.smartavi.com...
Page 13
7. Select the grid position that corresponds to the physical position of the display lit in blue. 8. Click Done www.smartavi.com...
Page 14
Completing the Configuration in the SignWall Task Manager 1. Open the Wall menu in the SignWall Task Manager 2. Click on Select Wall profile or press Ctrl+Shift+V www.smartavi.com...
Page 15
3. Set WallProfile 1x1 4. Change the Resolution 3840 by 2160 pixels. 5. Click Set Active Profile 6. Click OK SignWall is now configured and ready for use. www.smartavi.com...
Page 16
NOTICE The information contained in this document is subject to change without notice. Smart-AVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for any particular purpose.
Need help?
Do you have a question about the SignWall and is the answer not in the manual?
Questions and answers