Connecting To Your Cable/Satellite Box - ifrogz VOICEBOOST SOUNDBAR 2.0 Quick Start Manual

Connecting to Your Cable/Satellite Box

If you cannot access your TV's audio ports
(common in wall mounted situations) or just prefer
to connect to your cable or satellite box, you can
also connect the soundbar to the audio output of
your cable or satellite box.
1. On the back of your cable or satellite box,
locate the audio output ports.
These connections are typically labeled AUDIO
OUT and they are most commonly the red/white
RCA connections.
2. Connect the power cable, wrapped in a bag
with a RED label, to the back of soundbar. The
soundbar's power port is labeled as DC IN and
is outlined in a matching RED color for added
convenience.
3. Connect the RCA to 3.5mm cable, wrapped in
a bag with a YELLOW label, to the soundbar.
The port on the back of the soundbar is labeled
as AUDIO OUT and is outlined in a matching
YELLOW color for added convenience.
Note: This cable does have the red/white ends.
4. Connect the other end of the RCA to 3.5mm
cable to your satellite or cable box's audio port,
typically labeled as AUDIO OUT.