Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Nidec COPAL CLM-20
- Page 1 CLM-20 CardMark Manual Version 1.2 Nidec Copal Corporation History of Changes Version Date Description 16-May-2013 Released initial version with contents separated from the maintenance manual. 16-May-2015 Reviewed 15-Jun-2016 Added Sequential numbering Changed the face image...
-
Page 2: Table Of Contents
4.6. Sequential Numbering ..................... 20 Example for Ordinary Marking ....................21 5.1. Example ........................... 21 5.2. Creating the data ......................22 5.3. Saving the marking data (.lcpl) ..................26 5.4. Marking ..........................26 Page 2 of 27 Nidec Copal Corporation... -
Page 3: Installation And Uninstallation
Disclaimer: Nidec Copal shall not be held responsible for any claims, losses or expenses suffered, directly or indirectly, by Users or any third party related to the Software or the use of Software regardless of whether any possibility of such claims, losses or expenses were made known to Nidec Copal beforehand and Users agree to hold Nidec Copal harmless against any such claims, losses or expenses. - Page 4 Installation and Uninstallation CLM-20 CardMark Click “Next” according to the descriptions on the screen. Page 4 of 27 Nidec Copal Corporation...
-
Page 5: Verifying Installation
Check if the drivers and CardMark software are correctly installed. Turn the power of CLM-20 on and connect it to your PC. Turn the sub-power switch on check if the orange lamp changes from blinking to lighting. Page 5 of 27 Nidec Copal Corporation... - Page 6 The cause can be wrong connection between your PC and the CLM-20 or failure in the driver installation. Check the connection again and try installation of driver again. Also refer to the chapter 4 “Installation Failure on both 32-bit and 64-bit OS” of the CLM-20 Page 6 of 27 Nidec Copal Corporation...
- Page 7 If the problem is not solved though you restart the “Card Mark” and restart the CLM-20, you should check if wrong version of “CardMark” has been installed. Uninstall the “CardMark” and then install the correct version of “CardMark”. Page 7 of 27 Nidec Copal Corporation...
-
Page 8: Uninstallation
If you install 64-bit version of CardMark into the 32-bit OS or vice versa by mistake, you need to uninstall the software and install the correction version. 1.3.1. Windows 7 Open “Control Panel”. Select “Programs” Select “Uninstall a program”. Page 8 of 27 Nidec Copal Corporation... - Page 9 Installation and Uninstallation CLM-20 CardMark Select (double-click) “CLM20”. Press “Yes”. Page 9 of 27 Nidec Copal Corporation...
- Page 10 Installation and Uninstallation CLM-20 CardMark 1.3.2. Windows XP Open “Control Panel”. Select “Add or Remove Programs”. Select “CLM20” and press “Remove”. Page 10 of 27 Nidec Copal Corporation...
-
Page 11: Screen Images
CLM-20 CardMark 2. Screen Images CardMark enables feeding of Card and marking using the application created by SDK. It is used for evaluation and adjustment. 2.1. Startup Run CardMark.exe. Following dialogue will be displayed. Page 11 of 27 Nidec Copal Corporation... -
Page 12: Laser Control
2.3. Add item Add Text button Add Circle/Ellipse Add Rectangle Add Bar Code button Import File button 2.4. Edit item Change Parameter Select item for edit Delete button button Save button Load data button Page 12 of 27 Nidec Copal Corporation... -
Page 13: Total Control
OCR it. starting marking Send card to Display image of the card in camera reject stacker unit. You can extract and save the image for template matching. 2.7. Other Finish Display card frame Page 13 of 27 Nidec Copal Corporation... -
Page 14: Automatic Marking
Specify number of marking by altering the number as shown below. 3.3. Start Marking Clicking [Automatic Marking Start button] will let you start the Marking (it is common between manual insert and hopper connection). Page 14 of 27 Nidec Copal Corporation... -
Page 15: Add/Edit/Delete
Times of marking for pixel. Enter a value between 1 and 10 times. 4.1.6. Pass Times of marking for object. Enter a value between 1 and 10 times. Edited data may be saved by clicking [Save] button Page 15 of 27 Nidec Copal Corporation... -
Page 16: Add Text
Specify character size (letter height) Specify coordinate Specify rotation Specify whether fill is on or angle Specify alignment Click [OK] after specifying parameters will fix the selected parameters. Specify font style Specify font Page 16 of 27 Nidec Copal Corporation... -
Page 17: Add Bar Code
Specify Coordinate Specify rotation angle (in a unit of 90 degrees) Specify Bar Code type Specify Coordinate Click [OK] after specifying parameters will fix the selected parameters Code examples QR-Code Data Matrix FPD417 Page 17 of 27 Nidec Copal Corporation... -
Page 18: Import File Button
Example if the With a wrong image is 750 pixels combination, x 1000 pixels, resulting image 30mm (width) and could be like 40mm (height) followings. could be among the combinations of width and height. Page 18 of 27 Nidec Copal Corporation... -
Page 19: Edit/Delete
Click arrow and select item you wish to edit or delete Selecting item you wish to delete and clicking [Delete] will cause item to be deleted (Please note that you cannot “undo” delete). Text Code Rectangle Circle Page 19 of 27 Nidec Copal Corporation... -
Page 20: Sequential Numbering
Please do not forget to save the file each time you temporary stop marking operation using this function. After read the file, please make sure a number is correct. In the use of Auto marking function, an updated default value is saved automatically in a file. Page 20 of 27 Nidec Copal Corporation... -
Page 21: Example For Ordinary Marking
Coordinate is as follows. (0,0) The reference coordinate (coordinate of the upper left corner of the data) of each data is shown in the below table. Unit [mm] Coordinate Type Text Oval Rectangle Code Image Page 21 of 27 Nidec Copal Corporation... -
Page 22: Creating The Data
Check the box [Card Area] to display the frame of card. 5.2.1. Adding a text Text [CLM-20] font size 4 mm Click [Add Text…] to display the dialogue shown on the right. Set parameters as shown on the right. Page 22 of 27 Nidec Copal Corporation... - Page 23 Oval: width 9 mm, height 4 mm Click [Add Circle…] to display the dialogue shown below. Set parameters as shown below and click [OK] to close the dialogue and display the setting result. Page 23 of 27 Nidec Copal Corporation...
- Page 24 Code: QR code "CLM-20" width 13 mm, height 13 mm Click [Add Code…] to display the dialogue shown on the right. Set parameters as shown on the right and click [OK] to close the dialogue and display the setting result. Page 24 of 27 Nidec Copal Corporation...
- Page 25 [>] to make automatic configuration by calculating the height value with maintaining the aspect ratio. Set parameters as shown on the right and click [OK] to close the dialogue and display the setting result. Page 25 of 27 Nidec Copal Corporation...
-
Page 26: Saving The Marking Data (.Lcpl)
Now, make the marking on the front side of card. Click [Front File…] to display the following dialogue and specify the data file that you saved previously. Clear by button [Clear Back] if data is set. Uncheck if checked. Page 26 of 27 Nidec Copal Corporation... - Page 27 Set the number of cards and click [Card Marking]. Insert the card after the shutter at the entrance of equipment opens. The equipment will take in the card, make the marking on it and eject it. Page 27 of 27 Nidec Copal Corporation...
Need help?
Do you have a question about the COPAL CLM-20 and is the answer not in the manual?
Questions and answers