Buhl VP20ADPT Installation Instructions

Buhl VP20ADPT Microscope Adapter
Thank you for purchasing the VP20ADPT Microscope
Adapter for the Buhl VP20M visual presenter. This
adapter installs in seconds to your VP20M.
Installation Instructions
1. Slide the end of the
VP20ADPT on to the end of your VP20M's lens as
shown:
2. Install the 3 included thumbscrews to secure
the VP20ADPT to the VP20M lens
3. Aim VP20M with Microscope Adapter down
the eyepiece of any microscope and adjust the
focal length on both the microscope and VP20M
lens until picture becomes clear.
The VP20M's focus is adjusted by rotating the end
of the lens.
For Questions and Support please contact us at
support@buhl‐ind.com or visit our website at
www.buhl‐ind.com.