Halma Alicat CODA Quick Start Manual

CODA Touchscreen Interface
Quick Start Guide: Controllers
1
Use a Micro-USB cable to connect
power to the display, and wait for
the device to initialize. You may see
a "device not found" error, which
is not a problem at this point.
Data Connection
USB Type-A to USB-C
2
Connect a USB-A to USB-C
cable between the display
and the controller or meter.
3
Connect power to the
controller via DB-15 cable.
Process Connection
Download the full manual: alicat.com/coda
Troubleshooting • Questions:
+1 520-290-6060 • info@alicat.com • Live web chat at alicat.com
°C T:g
+27.52 -0.00
+0.000
Density: 997.04 kg/m
EDIT RESET
SETPT TOTALIZER
Display Power Connection
USB Type Micro-A
1.4 W, 9–30 Vdc
A
T:sec
+0.00
kg/h
TARE SETUP
C
Power and
Communication
Connection
DB-15
40–10,000 g/h:
4 W, 9–30 Vdc
30,000–100,000 g/h:
5 W, 9–30 Vdc