Connecting The Basket Handle (L370/P107/L484/L485); Cooking - Buffalo f/1.0L USM Instruction Manual

Buffalo tools fryer user manual
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6
UK

Connecting the Basket Handle (L370/P107/L484/L485)

Care must be taken to ensure that the handle is correctly located, and securely pulled back in to position
before being used.
Squeeze the two ends of the handle together.
1.
Slot the ends of the handle in to the basket.
2.
Lower the handle so that it slots over the frame of the basket.
3.

Cooking

Connect the appliance to the mains power supply.
1.
Set the thermostat to the desired temperature. The amber power indicator light turns On.
2.
Note: 170°C to 180°C is suitable for general cooking.
The appliance begins to heat the oil.
3.
Note: The red Heat indicator light turns On during heat-up. When the oil is at the set
temperatures the light turns Off.
Once the oil is at the set temperature lower the food into the oil using the basket supplied.
4.
WARNING: Ensure the basket is securely located on the basket mounts. These are
located towards the front of the oil pan on L370/P107/L484/L485.
Remove the basket from the oil once the food is cooked. Shake gently above the oil pan to remove
5.
any excess oil.
WARNING: The food and oil are very hot! Take care when removing the basket as oil may
drip.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

L300L301L370L484L490L495 ... Show all

Table of Contents