Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Magnum MWT0500
- Page 1 WATER TRAILER MODEL MWT0500 OPERATORS MANUAL / PARTS BOOK...
- Page 2 NOTES: Engine Make: Engine Serial #: Engine Model #: Pump Make: Pump Model #: Pump Serial #: Unit Model #: Unit Serial #:...
- Page 3 THE INFORMATION CON- TAINED IN THIS MANUAL WAS BASED ON MACHINES IN PRODUCTION AT THE TIME OF PUBLICATION. MAGNUM PRODUCTS, LLC. RESERVES THE RIGHT TO CHANGE ANY POR- TION OF THIS INFORMATION WITHOUT NOTICE.
-
Page 4: Table Of Contents
TABLE OF CONTENTS INTRODUCTION PAGE 3 TABLE OF CONTENTS PAGE 4 SPECIFICATIONS PAGE 5 SAFETY GUIDELINES PAGES 6 - 7 FILLING THE WATER TRAILER PAGE 8 DISCHARGING FROM THE WATER TRAILER PAGE 9 PUMP SAFETY PAGE 10 REAR SPRAY BAR ADJUSTMENT PAGE 10 WATER TRAILER MAINTENANCE PAGES 10 - 11... -
Page 5: Specifications
SPECIFICATIONS PUMP MANUFACTURER: TSURUMI PUMP MODEL: TE2-50HA PUMP TYPE: CENTRIFUGAL PUMP INLET/OUTLET: 2-INCH ENGINE MANUFACTURER: HONDA ENGINE MODEL: GX 120 ENGINE OIL REQUIREMENTS: SEE ENGINE OWNER’S MANUAL PUMP OUTPUT: 137 gal/min (520 l/min) WATER TANK CAPACITY: 500 gal (1895 liters) WATER FILL RATE: Full tank (500 gal) in 3-4 minutes @ full throttle EMPTY WEIGHT OF TRAILER:... - Page 6 National Highway Traffic Safety Administration (NHTSA) in addition to notifying Magnum Products, Inc. If NHTSA receives similar complaints, it may open an investigation; and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problem between you, your dealer, or Magnum Products, Inc.
- Page 7 NEVER remove any of the instruction or safety or tank failure. decals from the trailer. If any are damaged or missing, contact your dealer or Magnum Prod- Keep all people and objects clear of the spray ucts, Inc. for replacements.
-
Page 8: Filling The Water Trailer
FILLING THE WATER TRAILER To fill the tank from a hydrant: 1. Remove the tank covers (A). 2. Open valve 1 and close valves 2, 3 and 4. Make sure the gravity drain bibb (H) is closed. 3. Attach the hydrant adapter to the hydrant. Attach the threaded end of the 2” rigid fill hose to the hydrant adapter. -
Page 9: Discharging From The Water Trailer
DISCHARGING FROM THE WATER TRAILER To discharge from the rear spray nozzles: 1. Open valve 4 and close valves 1, 2 and 3. Make sure the gravity drain bibb (H) is closed. 2. Start the pump engine. Refer to the engine owner’s manual for proper starting and operation procedures. -
Page 10: Rear Spray Bar Adjustment
SAFETY PRECAUTIONS WHEN OPERATING THE PUMP 1. DO NOT drive over the hoses while they are pressurized or if the pump is running. This will cause a rapid increase/decrease in line pressure that could break or damage the pump engine, pump housing or rupture hoses on the unit. -
Page 11: Draining The Tank
Replace any missing or hard to read decals immediately; contact your dealer or Magnum Products, LLC for replacements. This water trailer is designed for specific applications. Do not modify or use this unit for any application other than which it was designed. -
Page 12: Decal Locations
DECAL LOCATIONS REAR BUMPER BOTH SIDES Warning decal sheet 40487 REAR FENDER BOTH SIDES BOTH SIDES BOTH SIDES BOTH SIDES BOTH SIDES Fender decal 40488 Instruction decal 11540... -
Page 13: Trailer Wiring Diagram
TRAILER WIRING DIAGRAM ELECTRIC BRAKE WIRING DIAGRAM... -
Page 14: Engine And Pump Assembly
ENGINE AND PUMP ASSEMBLY... - Page 15 ENGINE AND PUMP ASSEMBLY ITEM NO. PART NO. DESCRIPTION 40827 Wingnut, air cleaner Honda GX120 40828 Housing, air cleaner Honda GX120 40829 Element, air cleaner Honda GX120 40830 Guard, muffler Honda GX120 40831 Muffler, Honda GX120 40832 Cap, fuel tank Honda GX120 40833 Gasket, tank cap Honda GX120 40834...
-
Page 16: Tank Assembly
TANK ASSEMBLY... - Page 17 TANK ASSEMBLY ITEM NO. PART NO. DESCRIPTION 40233 Fitting, fog nozzle 40232 Fitting, 1” NPT x 3/4” NPT 90 40793 Nipple, pipe 1” NPT x 38” 40231 Fitting, tee 1” NPT x 1” NPT 40276 Nipple, pipe 1” NPT x close 40794 Fitting, 1”...
-
Page 18: Frame Components
FRAME COMPONENTS... - Page 19 FRAME COMPONENTS ITEM NO. PART NO. DESCRIPTION 60307 Nut, .500-13 hx nylock 60416 Washer, flat .500 40529 Actuator, adjustable hydraulic 60240 Nut, .625-11 hx nylock 60180 Washer, flat .625 60239 Screw, .625-11 x 5.00 hx hd GR5 19335 Hitch, pintle eye - 3.00 40743B Weldment, tongue - water trailer 60659...
-
Page 20: Frame Components, New Style
FRAME COMPONENTS, NEW STYLE... - Page 21 FRAME COMPONENTS, NEW STYLE ITEM NO. PART NO. DESCRIPTION 60307 Nut, .500-13 hx nylock 60416 Washer, flat .500 40529 Actuator, adjustable hydraulic 60240 Nut, .625-11 hx nylock 60180 Washer, flat .625 60239 Screw, .625-11 x 5.00 hx hd GR5 19335 Hitch, pintle eye - 3.00 40953B Weldment, tongue - water trailer...
-
Page 22: Hydraulic Brake Axle Assembly
HYDRAULIC BRAKE AXLE ASSEMBLY... - Page 23 HYDRAULIC BRAKE AXLE ASSEMBLY ITEM NO. PART NO. DESCRIPTION 40819 Hose, brake - .188 X 60.00 male/male 40818 Hose, brake - .188 X 12.00 male/male 19252 Fitting, brake line T - w/bracket 40857 Brake line, formed LH 40817 Hose, brake - .188 X 33.00 male/male 40858 Brake line, formed RH 60096...
-
Page 24: Electric Brake Axle Assembly
ELECTRIC BRAKE AXLE ASSEMBLY... - Page 25 ELECTRIC BRAKE AXLE ASSEMBLY ITEM NO. PART NO. DESCRIPTION 60096 Lug nut, axle 40769 Axle, tandem hyd 3500LB 46SC 65TC 60504 Nut, .562-18 HX shackle lock 19367 Plate, shackle bracket 40545 Axle equalizer, tandem 60503 Screw, .562-18 HX shackle GR5 19786 Wheel, ST225 / 75 D 15, bias ply 23119...
-
Page 26: Upper And Lower Manifold Assembly
UPPER AND LOWER MANIFOLD ASSEMBLY... - Page 27 UPPER AND LOWER MANIFOLD ASSEMBLY ITEM NO. PART NO. DESCRIPTION 40229 Valve, ball - 2.00NPT 21127 Nipple, pipe 2”NPT x 2.00 40225 Fitting, 2.00 plug for female coupler 40223 Fitting, 2” MNPT x 2” female coupler 40330 Fitting, tee 2” NPT x 2” NPT 40228 Fitting, tee 2”...
-
Page 28: Fill Hose Assembly
FILL HOSE ASSEMBLY... - Page 29 FILL HOSE ASSEMBLY ITEM NO. PART NO. DESCRIPTION 40474 Fitting, 2.00 MNPT X 2.50 hydrant 40266 Strainer, 2” 40224 Fitting, 2” barb to 2” male adaptor 60316 Clamp, hose 40502 Hose, water 2.00 x 20ft 40265 Fitting, 2” female swivel x 2” barb 40475 Nipple, pipe 2”...
-
Page 30: Discharge Hose Assemblies
DISCHARGE HOSE ASSEMBLIES... - Page 31 DISCHARGE HOSE ASSEMBLIES ITEM NO. PART NO. DESCRIPTION 40224 Fitting, 2.00 hose shank X 2.00 male 60316 Clamp, hose 40505 Hose, water 2.00 x 25ft MWT 40265 Fitting, 2.00 female swivel x 2.00 40267 Fitting, reducer 2.00 MNPT x 1.50 NPT 40257 Nozzle, water adjustable spray 40800...
- Page 32 REV: D PART NO: 40859 8.30.06...