Advertisement
3. The range hood should be firmly mounted on the wall ( wall mounted installation
method ). This can be done by drilling two holes on the appropriated position of the
wall and install the expandable rubber plug into the holes . Then tightening up the
self-tapping screws into the rubber plug by 4/5 in depth.
4. Loose the screws a bit at the hood hanging board don't remove screws and pull
the hanging board all the way up then tightening up the screws again .
5. Please install the hood by using the hanging board tag onto the self-tapping
screws which mounted on the wall and adjust the hood level then fixing the screws.
6. The range hood can install under the kitchen cabinet by using screws to fix at
the bottom of the cabinet . Besides , the exhaust duct has to be installed through
the cabinet to the outside of the window. ( Cabinet mounted type )
7. 6 inches diameter exhaust duct is recommended to use in order to maximize
suction efficiency. Bend of exhaust duct should be greater than 90°, to keep
exhaust smooth. To increase the efficiency of hood , the length of exhaust duct
should be
face down with downward
and avoid acute turns.
8. The air must not be discharged into the flue that is used for exhausting fumes
from appliances burning gas or other fuels ( not applicable to appliances that
only discharge the air back into the room ) , regulations concerning the
discharge of air have to be fulfilled.
9. Check the voltage on the rating label which should match the national or local code.
Wall Mounting Instruction
Wall
①Insert the screw
② Unscrew the screws
then pull up to the end
and lock tightly
③ Align the Hanging
Bracket'holes mounting
the hood on the wall
Hanging Bracket
2
Built-under Instruction
① Insert the screw
② Mount the hood
③ Release the bottom
damper and screw it
tightly
FUNCTION:
1. The Paddle switch design has stable function, reliable safety and
long lifetime.
2. Left and right Blower Wheel work separately and at one time; 2-fan
speed control to suit different types of cooking.
3. The Strong Suction Design effectively drain the oil and smoke entirely;
The newly designed oil collecting device in 15°drain the oil
oil cup.
Operation:
1." "Button
※ Press The Iamp button for the on / off
2."L"and"R"Button
Cabinet
Paddle Switch
Lamp
Bottom damper
Grille
Oilcup
to the
3
Advertisement
