Operation; Incoming Call; Incoming Call From Outdoor Station - ABB M22411-W Product Manual

9

Operation

9.1

Incoming call

9.1.1

Incoming call from outdoor station

1. Call request
■ During a call request, press "
During a call request, 2 snapshots will be taken automatically on the first second and the
■
fifth second.
No. Description
1
" " indicates the ring status.
2 Call ID
Display the rest of time (1...30 seconds)
3
The call request will be terminated if no operation is carried out within 30 seconds.
4 Display the image from the calling outdoor station.
Note
If you want to set the ringtone for the incoming call, see chapter 10.4.4 "Setting
the ringtone type" on page 61.
Note
During a call request, if "One on" mode is used on the (mini) system controller,
only the primary indoor station can show the image, for the secondary indoor
station "
Product manual 2TMD042000D0050
" to accept the call.
" needs to be pressed to obtain the image.
Operation
│21