Introduction; Starting Out; Important Notes - Novasina LabSwift-aw Operating Instructions Manual

1.

Introduction

1.1 Starting out

1.2. Important Notes

4
Thank you for having purchased an instrument of the Novasina LabSwift-aw
system for measuring water activity. You have opted for a highly accurate and
reliable instrument representing the latest state of the art in electronics and
software design when it comes to highest precision in aw (water activity)
measuring.
To get the most out of all the possibilities of your Novasina LabSwift-aw and
to guarantee safe, reliable operation, please read these operating instructions
before setting the unit into operation carefully.
Please keep this manual in a safe place where it will be at hand whenever you
need it. If you lose the manual, please contact your Novasina representative
for immediate replacement.
Intended use
The Novasina LabSwift-aw is exclusively intended for measuring WATER
ACTIVITY under strict adherence to the information and notes given in this
manual. Any use beyond this scope is considered to be a violation of the
intended purpose and may endanger your safety or could result in the product
being damaged. Any use of this Novasina instrument other than as intended
is at the customer's own risk and by no means will the manufacturer or supplier
be liable for any resulting damage.
Safety instructions
• The Novasina LabSwift-aw system should be serviced, maintained and
repaired only by qualified people who are familiar with the equipment.
• The LabSwift-aw system must not be used in hazardous zones or similar
areas. The design was made only for the laboratory field.
• No explosive materials and no highly inflammable substances may be
measured in the measurement chamber system.
• Before connecting the unit to the mains, ensure that:
• The mains voltage is within 90...260V, at 50 or 60Hz. Please check the
type plate of the system!
• The power cable between the mains and the instrument is not damaged.
• The Novasina LabSwift-aw system may be used only under the specified
operating conditions (see chapter 10).
• Observe and strictly adhere to the local regulations regarding the handling
of mains- powered devices.
• Use only genuine accessories and spare parts available from your Novasina
supplier or visit the homepage www.novasina.com.
• This instrument must not be modified in any way without the written
consent of the manufacturer.
• Never open the instrument without removing the mains power cable first
to avoid any risk of dangerous currents.