TF1500 series power supplies support RS 232/RS 485 UART control interface based on RXD/TXD TTL signals or I²C interface based on serial clock (SCL) and serial data (SDA) signals. Both allow control of functions such as ON/OFF control, output current limit and output voltage settings.
Page 3
• Switch off the main AC power before connecting the power supply. • TF1500 series are defined as Class I equipment. Use input wire compliant to the local electrical code for the AC input for this mod- el rating. The rating is listed on the product nameplate label.
The recommendation is to use cable lugs for proper and secured connection. TF1500 series power supply offer mounting options from the bottom and/or long sides of enclosure. Refer to the mechanical drawing in the datasheet for detailed dimensions. Use M4 screws with maximum penetration of 3mm measured from the enclosure surface.
Need help?
Do you have a question about the TF1500 Series and is the answer not in the manual?
Questions and answers