Advertisement
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Check you have all the components
and tools listed on the front cover
and page 3.
Remove all fittings from the plastic
bags and separate them into their
groups.
Keep children and animals away
from the work area, small parts
could choke if swallowed.
Make sure you have enough space to
layout the parts before starting.
General care and maintence
Each table top is made by hand and is
slightly different and unique.
This table can be used outside all year
around but should be covered or moved
to a sheltered area during the winter
months to protect its good looks.
If covering please ensure that table is
Cleaning and care
Dust regularly with a clean dry cloth.
Wipe up any spills immediately with a
damp cloth and then dry the surface
with a clean dry duster.
Repeat this procedure for periodic
cleaning.
Remove stubborn stains with a weak
washing up liquid solution and a damp
cloth and dry after with a clean cloth.
The use of furniture polish or spray is
not necessary or recommended.
Never use abrasive or corrosive
cleaning agents.
If paint finish becomes chipped or
damaged treat exposed area with rust
General information
If for any reason you should have
problems with your Habitat product,
please contact the store from which
you purchased it.
Do not stand or put weight on the
product, this could cause damage.
Assemble the item as close to its
final position (in the same room) as
possible.
Do not place furniture directly in front
of radiators, fires or any other
source of heat.
Parts of the assembly
will be easier with 2
people.
fully dry first, and that cover
is ventilated.
Do not leave this table standing
in water.
From time to time check that there
are no loose screws on this unit.
Tighten as necessary.
inhibitor immediately and then touch
up with a suitably colour matching
paint for use on metalwork.
MAX
30kg
Please retain your receipt as proof of
purchase.
If you have any comments or
suggestions regarding this product,
assembly instructions or service
Assemble on a soft level surface to
avoid damaging the unit or your floor.
We do not
recommend the use
of power drill/ drivers
for inserting screws,
as this could damage
the unit.
Only use hand screwdrivers.
Dispose of all packaging carefully
and responsibly.
Due to the handmade nature of
this table top and the construction
techniques involved, some cracking
may develop on the underside of the
top. This cracking will not affect the
function or serviceability of the table.
Maximum recommended
loading. Do not stand on
the table!
received, please contact the store or
Habitat Head Office via its web site:
www.habitat.co.uk
or write directly to: Habitat Retail Ltd.
489-499 Avebury Boulevard,
Milton Keynes MK9 2NW.
Advertisement
