Advertisement
1
Required tools
6 mm Allen key
2
Marking
3
Left pedal
M o u n t i n g
or
15 mm open-end wrench
Before mounting the pedals,
you have to pay attention to the
marking of the pedals. There is a
right (R) and a left (L) pedal.
For an easy installation we
recommend to use a little bit of
mounting grease.
The pedal marked with the L
belongs to the left side and is
tightened counter clockwise at the
pedal axis (torque 35 NM / 310 lbf.
in).
4
Right pedal
5
After 30 miles
6
Review
The pedal marked with the R
belongs to the right side and is
tightened clockwise at the pedal
axis (torque 35 NM / 310 lbf.in).
Our recommendation is to check
the pedals after 30 miles and
tighten them if necessary.
Any problems mounting the
pedals? If so please feel free to
contact
our support.
Please don't forget to give us your
feedback /
review.
Advertisement
