Summary of Contents for W&T rule.box 53920
- Page 1 Operating instructions Commissioning and application rule.box valid for the product: #53920 rule.box USB #55920 rule.box hub #57920 rule.box Digital 2xIn, 2xOut #58920 rule.box RS232/422/485 v1.00, 27.11.2020, english...
- Page 2 © 11/2020 by Wiesemann und Theis GmbH Errors and omissions excepted: Because we can make mistakes, none of our statements should be used without ve- rification. Please report any errors or misunderstandings that come to your attention so that we can identify and correct them as quickly as possible. Only carry out work on or with W&T products if it is described here and you have read and understood the instructions in full.
-
Page 3: Table Of Contents
Inhalt 1. Security and law ..............5 Notes ........................5 Instructions for action ..................6 Solve task ........................6 Other design elements ..................6 Qualified personnel .................... 7 Intended use ....................... 7 Product modifications..................7 Electrical safety ....................8 Electromagnetic compatibility ................8 Conformity to standards .................. - Page 4 Make network settings via DHCP ................14 Make network settings via the default IP ...............15 Call web interface ..................... 15 Calling up the web interface via IP address ............15 Calling up the web interface via the WuTility ............15 Make language settings ..................16 Make further settings via the web interface ............
-
Page 5: Security And Law
1. Security and law Notes This manual contains instructions concerning your personal safety. They are introduced by a signal word expressing the seriousness of the danger: DANGER means an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a possible hazard that could result in death or serious injury. -
Page 6: Instructions For Action
Some other information within this guide is also highlighted: ❗ Note: Risk of property damage imminent Circumstances that can lead to property damage General information ℹ General information on the following text section �� Further information Reference to further information ��... -
Page 7: Qualified Personnel
�� www.wut.de User input: 129.11.121.1 Sourcecode: print(„This is a programming example“) Emphasis in text: Identifiers, such as button labels, are highlighted in the body text. Qualified personnel ⚠ WARNING 0Danger to life due to electric current Improper installation can lead to accidents with electric current ��... -
Page 8: Electrical Safety
Electrical safety • Before starting any work on the rule.box, completely disconnect the power sup- ply by taking suitable measures and secure it against being switched on again. • Only use the device in closed and dry rooms. • Do not expose the device to high ambient temperatures or direct sunlight. Ob- serve restrictions with regard to the maximum ambient temperature. -
Page 9: Storage
• EN 61000-3-3: 2013 • EN 61000-4-2: 2009 • EN 61000-4-3: 2006 + A1: 2008 + A2: 2010 • EN 61000-4-4: 2012 • EN 61000-4-5: 2014 +A1 • EN 61000-4-6: 2014 • EN 61000-4-8: 2010 • EN 61000-4-11: 2004 • EN 61000-6-2: 2005 •... -
Page 10: Product Information
2. Product information Manufacturer Wiesemann & Theis GmbH Porschestr. 12 42279 Wuppertal Germany Tel: +49 (0)202 26800 Fax: +49 (0)202 2680265 E-Mail: info@wut.de �� www.wut.de WEEE registration: DE 77008276 BattG registration: 21000788 Product labeling The unique identification of the product type is done via the article number on the device label. -
Page 11: Accessories And Spare Parts
Accessories and spare parts For reliable operation we recommend the use of original W&T accessories: Connector (#11111) 2-pole, 5.08 mm pitch for power supply connection �� www.wut.de/11111 Power supply with Euro plug (#11021) Output: 24V DC, 500mA, energy efficiency: Level VI, no-load power < 0.075W ��... -
Page 12: Installation
3. Installation �� Installers The following section is intended for the installers of the rule.box and assumes appropriate expertise. Mounting in the control cabinet ⛳ Mount on top hat rail ❗ Note: Risk of property damage imminent Please observe the safety instructions in chapter 1. The rule.box can be mounted on DIN rail (TH 35). -
Page 13: Set Up Power Supply Via External Power Supply Unit
⛳ Set up power supply via external power supply unit ⚠ WARNING 0Danger to life due to electric current The use of an incorrect power supply can lead to accidents with electric current and fire �� Only use power supplies according to the specification ��... -
Page 14: Commissioning
4. Commissioning �� Network Administrator This section is intended for network administrators and assumes knowledge of net- work configuration. If you as a user do not know what to do with the steps described here, please contact your system administrator. Make network settings To perform the tasks described below, you will need the following information: •... -
Page 15: Make Network Settings Via The Default Ip
Open the log file of your DHCP server or the overview of network nodes at your router to determine its IP address based on the MAC address of the rule.box. If necessary, configure a fixed lease for the rule.box so that it is always ac- cessible under the same IP address. -
Page 16: Make Language Settings
The rule.box web interface opens in your web browser. ⛳ Make language settings The web interface is available in German and English translation. Click the circle with the country flag in the upper right corner of the web in- terface. Select the language in which you want the web interface to be displayed ba- sed on the country flag. -
Page 17: Set Date And Time
Log in to the web interface as an administration user. Click the Network button in the Basic Settings section of the Administration menu. Make the configuration of the second network interface. Click Save to apply the changes. The second network interface can now be used. ⛳... -
Page 18: Set/Change Passwords
⛳ Set/change passwords ❗ Note: Danger from cyber attacks Please assign strong passwords for all users to maintain the highest possible level of information security. The rule.box has four different user roles: The administrator who can set the device‘s preferences, a user who can define Node-RED flows, a dashboard user who can access the dashboards associated with the flows, and a database user who has read and write permissions to the internal database. -
Page 19: Use
5. Use �� IoT developers and end users The following section is intended for developers and users of Node-RED flows and dashboards. �� Node-RED documentation This manual does not cover the programming of Node-RED. A good introduction to this can be found in the official documentation at: ��... -
Page 20: Interfaces
Interfaces ⛳ Wiring of the digital inputs and outputs �� Product The following section refers only to the rule.box Digital #57920. For the operation of the inputs and outputs a DC voltage of max. 30V DC is re- quired, which must be applied to the terminals Vdd and GND. Connect a voltage of max. - Page 21 Operating mode RS232 RS422, RS485, 4-wire bus master DTR handshake RS422, RS485, 4-wire bus maste RTS handshake RS485, 4-wire / 2-wire with echo DTR control RS485, 2-Draht ohne Echo DTR-Steuerung RS485, 4-wire / 2-wire with echo RTS control RS485, 2-wire without echo RTS control RS485, 4-wire / 2-wire with echo Automatic control...
-
Page 22: Usb Interface
In an RS422 or RS485 mode: Pin# Signal Function TxD A Output RxD A Input RTS A Output CTS A Input Signal GND TxD B Output RxD B Input RTS B Output CTS B Input For 2-wire connections in RS422/485 operation, it is mandatory to insert a jum- per between pins 1 + 2, and 6 + 7 in the connector of the data line on the rule. -
Page 23: Maintenance
6. Maintenance ⛳ Open housing ❗ Note: Risk of property damage due to electrostatic discharge Electrostatic discharges can destroy components on the board. Therefore, if you do not have ESD equipment, touch the metal surround on the network interface before opening the housing to establish equipotential bonding. -
Page 24: Restore Factory Settings Immediately
You can now mount the rule.box again and put it into new operation. ⛳ Restore factory settings immediately You can also reset the rule.box in the administration area of the web interface. In the administration navigation, select the menu item Maintenance. Click the FACTORY SETTINGS button in the Reset area Confirm the reset in the following dialog. -
Page 25: Warm Start
After successful update, click the Finish button to complete the process. The rule.box restarts with the changed firmware and is accessible via the net- work again after a short time. ⛳ Warm start You can restart the rule.box in the administration area of the web interface. Click on the Maintenance menu item in the administration navigation. -
Page 26: Decommissioning
7. Decommissioning ⛳ Dismounting the device from the top-hat rail The rule.box can be easily detached from the top-hat rail. For the implementati- on you need: • a small slotted screwdriver Remove the network cable and the power supply. Below the rule.box, at the level of the top-hat rail, there is a black tab. Use the screwdriver to pull this downwards. -
Page 27: Technical Data
8. Technical data �� Online data sheets Detailed information about the product, as well as tools and the latest firmware, can be found in the online data sheet at: �� www.wut.de Connections and displays Network: 1 x 100/1000BaseT Autosensing/Auto-MDIX, RJ45 ��... - Page 28 Hardware and software Hardware: Marvell 88F6820 Flash: 4GB (eMMC) RAM: 1GB (DDR3) Software: Node-RED Node-RED Dashboard various pre-installed Node-RED extensions Housing and other data Housing: Plastic housing with integrated Top-hat rail mounting 105 x 22 x 77mm (L x W x H) Lagertemperatur: -40...+70°C Betriebstemperatur:...
- Page 30 Wiesemann & Theis GmbH Porschestraße 12 D-42279 Wuppertal Mail info@wut.de www.wut.de Tel. +49 (0)202 2680-110 +49 (0)202 2680-265...