Buffalo DriveStation HD-HSIU2 Series Quick Setup Manual page 4

EN
Using TurboUSB
To use TurboUSB, you must fi rst enable it. From the Start menu, choose
Programs > BUFFALO > TurboUSB > TurboUSB for HD-HSIU2. (Fig: 2)
Click Enable and follow the instructions. (Fig: 3)
Once the wizard has completed you must disconnect the DriveStation by
clicking on the 'Safely Remove Hardware' icon
in the taskbar) (Fig: 5). Once indicated, remove and reattach the USB cable
from your PC to fi nalise activation of TurboUSB.
Fig: 2
Fig: 3
2
in the systray (located
2