Preparing The Camera - Velleman RCQC3 User Manual

One of those stunts is the 3D flight or roll. To do so:
1. Keep your quadcopter hovering at a steady height of minimum 3 m.
2. Press the 3D flight button. Move the cyclic stick to the left, the right, forward or backward.
3. You will now have completed a perfect 360° roll, left, right, forward or backward according to your
cyclic stick movement!
Only use the 3D flight with fully-charged quadcopter and remote control batteries, and in an
open-space area without obstacles.
9. The Camera Function
9.1

Preparing the Camera

1. Make sure the camera is connected to the quadcopter.
2. Switch on the quadcopter. If the LED inside the camera blinks red and turns green, the camera is
ready to be used. If the LED burns red and switches off, check if the camera has an SD card or if the
inserted SD card is faulty.
9.2 Preparing the Smartphone
To download the app on your device, please scan the QR code below:
After having installed the app, go the settings menu of your device and tap the wifi option.
At this point, switch on the quadcopter. The quadcopter will appear in the list (WiFi-720P-XXXXXX). Tap
the quadcopter code to make the connection. The connection is established as soon as the code is ticked.
V. 01 – 11/07/2016
®
iOS
RCQC3
8
®
Android
©Velleman nv