Installation - LG ID2750 Service Manual

LG-ID2750

5. Installation

5.1 Installing a Battery Pack (Soft Pack type)
1) The soft battery pack is keyed so it can only fit one way. Align the groove in the battery pack with
the rail on the back of the phone until the battery pack rests flush with the back of the phone.
2) Insert the bottom of battery into the openning on the back of the phone. Then, push the battery
cover up until the latch clicks.
5.2 For Adapter Use
1) Plug the adapter into a wall outlet. The adapter can be operated from either a 110V or a 220V
source.
2) Insert the adapter jack into the phone with the installed battery pack.
Red light indicates battery is being charged. Green light indicates battry is fully charged
5.3 For Mobile Mount
5.3.1 Installation Position
In oIDer to reduce echo sound when using the Hands-Free Kit, make sure that the speaker and
microphone are not facing each other and keep microphone a generous distance from the speaker.
5.3.2 Interface Box
Choose an appropriate flat surface ( somewhere under the dash on the passenger side is preferred )
and mount the IB bracket with the four self-tapping screws provided. Clip the IB into the IB bracket.
5.3.3 Microphone Installation
Install the microphone either by cliiping I onto the sunvisor (driver's side) or by attaching it to door post
(driver's side), using a velcno adhesive tape (not included).
LGE
LG Electronics Inc.
12/26