Safety Instructions; Parts Description - APRILIA AHD 2114 Instruction Manual

SAFETY INSTRUCTIONS

• By ignoring the safety instructions the manufacturer can not be hold responsible
for the damage.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
• Do not use this appliance with a damaged cord or plug or when the appliance has
malfunctions, or has been damaged in any manner. To avoid a hazard make sure that
a damaged cord or plug will be replaced by an Competent qualified repair service(*).
Do not repair this appliance yourself.
• Never move the appliance by pulling the cord and make sure the cord can not
become entangled.
• The appliance must be placed on a stable, level surface.
• The user must not leave the device unattended while it is connected to the supply.
• This appliance is only to be used for household purposes and only for the purpose
it is made for.
• To protect yourself against an electric shock, do not immerse the cord, plug or
appliance in the water or any other liquid.
• WARNING: Do not use this appliance near bathtubs, showers, basins or other
vessels containing water.
• This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be made by children
without supervision.
• When the appliance is used in a bathroom, unplug it after use since the proximity of
water presents a hazard even when the appliance is switched off.
• For additional protection, the installation of a residual current device (RCD) having
a rated residual operating current not exceeding 30 mA is advisable in the electrical
circuit supplying the bathroom. Ask your installer for advice.

PARTS DESCRIPTION

1. Heat button
2. Cool shot button
3. Hang up loop
220V-240V~ 50Hz/60Hz 1200W
1
2
2
3